habe das problem,das ich kein image flashen kann. kann kein fehler feststellen.
kann mir jemand helfen?
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-54.7a.ba.07.00.00-ef
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.100, My IP 192.168.0.122
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug:
TFTP failed, giving up...
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 152952
verify sig: 263
Branching to 0x40000
U-Boot 1.1.1 (TuxBox) (May 11 2004 - 16:41:13)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
=> bootp 120000 /E/Dateien/200405211341_yadi_squashfs_head_1x.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
B@4