WinGrabTV 0.10 ALHPA 1

[sigel]

Bei mir liefs auf Anhieb gut. Stottern auf Kanal 2 bekam ich erst nach aktiveiren des EPG-Modus. Kanal 1 lief ruckelfrei weiter. Erneutes starten des VLC auf Kanal 2 öffnete dann das Bild nicht mehr. Auch Abschalten des EPG-Modus hat nichts geholfen.
Nach einem Neustart (des Rechners) gings jedoch wieder problemlos.
Hardware ist ein AMD XP 1800. Box eine Philips.

Weiter so

Gruß
Sigel

[u235]

I have played a lot with both versions 0.05 and 0.10 alpha 1 and both work great usually. The only major problem I'm seeing is that after 1-10 minutes of running wingrabTV (and also the same problem with wingrabE .082a) I see the following errors:

16:56:02.329 [AudioHTTP0] terminated
16:56:00.313 [AudioPesParser0] terminated
16:56:00.219 [VideoHTTP] terminated
16:55:58.548 [VideoPesParser] terminated
16:55:58.548 [VideoProcessor] terminated
16:55:58.344 [AudioProcessor0] terminated
16:55:58.344 [Muxer] terminated
16:55:58.344 [Muxer] muxer panic: audio (0) video pts diffrence [-3177] to big. something must be wrong with the validation code. please inform Elmi on #dbox2. created stream will be invalid. [muxer terminated]
16:55:58.344 [Muxer] warning: audio (1) pts discontinuity detected [-8640 pts cycles]
16:55:58.329 [Muxer] audio (1) pts < video pts [audio packet skipped]
16:55:58.329 [Muxer] audio (1) pts < video pts [audio packet skipped]
16:55:58.329 [Muxer] audio (1) pts < video pts [audio packet skipped]
16:55:58.329 [Muxer] audio (1) pts < video pts [audio packet skipped]
16:55:58.329 [Muxer] warning: video dts discontinuity detected [-7507 dts cycles]
16:55:58.329 [Muxer] warning: invalid pts in video frame [7508 pts cycles, corrected, sequence may be invalid]
16:55:58.329 [Muxer] warning: invalid pts in video frame [7508 pts cycles, corrected, sequence may be invalid]
16:55:58.329 [Muxer] warning: invalid dts in video frame [7508 pts cycles, corrected, sequence may be invalid]
16:55:58.313 [Muxer] warning: invalid pts in video frame [9009 pts cycles, corrected, sequence may be invalid]

Once this happens, streaming stops. What is causing this, is it the dreambox software or because I'm decrypting nagravision or just bugs? Any help would be very much appreciated, please keep up the good work on this tool.

[pRiV]

I have played a lot with both versions 0.05 and 0.10 alpha 1 and both work great usually. The only major problem I'm seeing is that after 1-10 minutes of running wingrabTV (and also the same problem with wingrabE .082a) I see the following errors:

16:56:02.329 [AudioHTTP0] terminated
16:56:00.313 [AudioPesParser0] terminated
16:56:00.219 [VideoHTTP] terminated
16:55:58.548 [VideoPesParser] terminated
16:55:58.548 [VideoProcessor] terminated
16:55:58.344 [AudioProcessor0] terminated
16:55:58.344 [Muxer] terminated
16:55:58.344 [Muxer] muxer panic: audio (0) video pts diffrence [-3177] to big. something must be wrong with the validation code. please inform Elmi on #dbox2. created stream will be invalid. [muxer terminated]
16:55:58.344 [Muxer] warning: audio (1) pts discontinuity detected [-8640 pts cycles]
16:55:58.329 [Muxer] audio (1) pts < video pts [audio packet skipped]
16:55:58.329 [Muxer] audio (1) pts < video pts [audio packet skipped]
16:55:58.329 [Muxer] audio (1) pts < video pts [audio packet skipped]
16:55:58.329 [Muxer] audio (1) pts < video pts [audio packet skipped]
16:55:58.329 [Muxer] warning: video dts discontinuity detected [-7507 dts cycles]
16:55:58.329 [Muxer] warning: invalid pts in video frame [7508 pts cycles, corrected, sequence may be invalid]
16:55:58.329 [Muxer] warning: invalid pts in video frame [7508 pts cycles, corrected, sequence may be invalid]
16:55:58.329 [Muxer] warning: invalid dts in video frame [7508 pts cycles, corrected, sequence may be invalid]
16:55:58.313 [Muxer] warning: invalid pts in video frame [9009 pts cycles, corrected, sequence may be invalid]

Once this happens, streaming stops. What is causing this, is it the dreambox software or because I'm decrypting nagravision or just bugs? Any help would be very much appreciated, please keep up the good work on this tool.

The interesting line is at

16:55:58.344 [Muxer] muxer panic: audio (0) video pts diffrence [-3177] to big. something must be wrong with the validation code. please inform Elmi on #dbox2. created stream will be invalid. [muxer terminated]

there seems to be an unhandled exception in the WinGrabEngine from Elminster. I'll try to understand under which circumstances it can happen, and will try to prevent them. =)

Does this problem occur on 0.05 as on 0.10 ?

[pRiV]

<!-- -->

Bei mir liefs auf Anhieb gut. Stottern auf Kanal 2 bekam ich erst nach aktiveiren des EPG-Modus. Kanal 1 lief ruckelfrei weiter. Erneutes starten des VLC auf Kanal 2 öffnete dann das Bild nicht mehr. Auch Abschalten des EPG-Modus hat nichts geholfen.
Nach einem Neustart (des Rechners) gings jedoch wieder problemlos.
Hardware ist ein AMD XP 1800. Box eine Philips.

Weiter so

Gruß
Sigel

Hatte der Debug des ruckelnden/nicht mehr angezeigten Streams denn Dateneingang angezeigt?

[u235]

Yes it happens in wingrabtv 0.05 and 0.10 alpha 1. It also happens in wingrabE 0.082a which seems to be very similar in function. Is anyone else seeing this problem? I can provide more information if it will help, just ask.

I have played a lot with both versions 0.05 and 0.10 alpha 1 and both work great usually. The only major problem I'm seeing is that after 1-10 minutes of running wingrabTV (and also the same problem with wingrabE .082a) I see the following errors:

<Edited out code here>

Once this happens, streaming stops. What is causing this, is it the dreambox software or because I'm decrypting nagravision or just bugs? Any help would be very much appreciated, please keep up the good work on this tool.

The interesting line is at

16:55:58.344 [Muxer] muxer panic: audio (0) video pts diffrence [-3177] to big. something must be wrong with the validation code. please inform Elmi on #dbox2. created stream will be invalid. [muxer terminated]

there seems to be an unhandled exception in the WinGrabEngine from Elminster. I'll try to understand under which circumstances it can happen, and will try to prevent them. =)

Does this problem occur on 0.05 as on 0.10 ?

[pRiV]

Jeder der Probleme mit mehreren Instanzen vom VLC hat, sollte bei den Einstellungen im Feld "VLC start" -> "Parameter" anstatt "http://127.0.0.1:$PORT/" die Zeichenfolge "--nooverlay http://127.0.0.1:$PORT/" eintragen. Dies sollte die meisten Probleme beseitigen!

[clandos]

Bei mir läuft die Alpha Version auch auf Anhieb gut. Das mit den zwei Kanälen ist auch Super.
Super wäre aber auch die Unterstützung von zwei Dboxen, dann muss ich nicht jedesmal die IP ändern
Geht das?
Schönen Gruß

[pRiV]

Danke an Alle für das Feedback, es wird hoffentlich dieses WE noch eine ALPHA2 geben, in welcher

a) das Debugging verbessert wird
b) die gröbsten Bugs draussen sind

Ich werde diesmal davon absehen, das ganze hier zu posten: Ich möchte bitten dass die Diskussion nicht an X-Plätzen, sondern lediglich im WinGrabTV Forum passiert. Also bitte auf http://WinGrabTV.de/ vorbeischauen, wer Interesse hat.

GreeTinGs,
pRiVi, Programmierer WinGrabTV

[sanaia]

Hi,

Ich bitte um erste Rückmeldungen zur einer neuen Alpha-Version von WinGrabTV.

http://wingrabtv.de/WinGrabTV-0.10-ALPHA-1.exe

ich wollte es gerade mal testen, aber das prg lässt sich gar nicht erst starten. Es stürzt sofort nach dem start ab (WinXP).