Leider läuft nix bleibt beim kernel booten stehen.
Dachte mir dann spiele ich halt das alte wieder drauf aber nix da, bootmanager macht nix
das wird mir angezeigt (bootmanager):
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-35.53.d1.07.00.00-14
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 169.254.8.235, My IP 192.168.0.100
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug:
TFTP failed, giving up...
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 148088
verify sig: 263
Branching to 0x40000
U-Boot 1.0.2 (TuxBox) (May 1 2004 - 09:58:39)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ..
.** ERROR ** tuxbox has dup version = 00000003
** ERROR ** boot has dup version = 00000004
** ERROR ** boot.conf has dup version = 00000019
** ERROR ** boot.conf has dup version (resolve) = 00000019
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
** ERROR ** tuxbox has dup version = 00000003
** ERROR ** boot has dup version = 00000004
** ERROR ** logo-lcd has dup version = 00000018
** ERROR ** logo-lcd has dup version (resolve) = 00000018
** ERROR ** tuxbox has dup version = 00000003
** ERROR ** boot has dup version = 00000004
** ERROR ** logo-fb has dup version = 00000017
** ERROR ** logo-fb has dup version (resolve) = 00000017
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
=> bootp 120000 /H/flashimage.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
, kann jemand helfen oder zumindest etwas damit anfangen ????