Habe meine Box auf Neutrino umgebaut. Seit heute Zeigt Sie auf einmal das BR Loguo und startet nicht mehr.
Hier mal das Log:
debug: DDF: Calibrating delay loop... debug: DDF: 66.524364 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-bd.8b.fe.07.00.00-d5
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.90, My IP 192.168.136.3
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot.txt
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot.txt
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot.txt
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot.txt
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot.txt
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot.txt
debug:
TFTP failed, giving up...
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 146452
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:18:06)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Phillips
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.env: can't set "lcd_inverse"
env: can't set "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 648893 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 648829 Bytes = 633.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Sep 7 12:04:47 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop...
Würd mich über schnelle Hilfe freuen.
MFG
Schirrmi