suche: yadd von AlexW vom 22. July 03

Hi,

joa, wie die überschirft schon sagt:
ich suche das yadd von AlexW vom 22. July 03
auf http://dboxupdate.berlios.de/
gibts ja nur das image vom 22. July, ein uraltes yadd oder ein snapshot yadd
ich brauch das weil das mce tool nur mit dieser version perfekt zusammenarbeitet

gibt's irgendwo n yadd archiv oder sowas??
Danke schon mal

greetz
TheComing

*schieb*
hat die keiner??? oder gibts die nich?

Beitrag von **Zahni** » Freitag 26. September 2003, 11:16

Gab es nicht. Wäre ja sonst da.

-Zahni

also komm ich nicht ums image herum?

Beitrag von **Zahni** » Freitag 26. September 2003, 11:22

Nö.

-Zahni

Beitrag von **petgun** » Freitag 26. September 2003, 11:47

hi,
in den Newtuxflashtools gibt's einen Menuepunkt 'Yadd like' abspeichern....hat das schon mal einer von Euch getestet ?

cu,
peter

jo, hab ich gefunden beim durchkämmen der postings und auch probiert.
hab versucht, mir aus dem n yadd zu schreiben, aber er will nich davon booten
comlog:

debug: fpID 5a dsID ...
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0048

will verify ELF image, start= 0x800000, size= 1267512
=debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID ...
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
debug: &_end 0x34894, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.145
debug: Sending TFTP-request for file G/dbox/yadds/meinTestYadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 204200
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Jun 24 2002 - 20:39:15)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-43-94-aa
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.145
Filename 'G/dbox/yadds/meinTestYadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2814 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.145
Filename 'G/dbox/yadds/meinTestYadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ##############

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.145
Filename 'G/dbox/yadds/meinTestYadd/tftpboot/kernel-yadd'.
Load address: 0x100000
Loading: #######################################################################
##########################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 659670 Bytes = 644 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Sep 7 12:12:49 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.1
:G/dbox/yadds/meinTestYadd/yaddroot/
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30788k available (1128k kernel code, 384k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:43:94:aa
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.145
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.145, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.145, domain=, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
Bad emulation init/1
NIP: 3000dd84 instruction: 0000028e opcode: 0 A: 0 B: 0 C: a code: 147 rc: 0
pte @ 0x3000dd84: (0xc014e300)->(0xc0157034)->0x01eec889
RPN: 01eec PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1eecd84 pte @ 0xc1eecd84: no pmd
Bad emulation init/1
NIP: 3000dd84 instruction: 0000028e opcode: 0 A: 0 B: 0 C: a code: 147 rc: 0
pte @ 0x3000dd84: (0xc014e300)->(0xc0157034)->0x01eec889
RPN: 01eec PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1eecd84 pte @ 0xc1eecd84: no pmd

und dieses

Bad emulation init/1
NIP: 3000dd84 instruction: 0000028e opcode: 0 A: 0 B: 0 C: a code: 147 rc: 0
pte @ 0x3000dd84: (0xc014e300)->(0xc0157034)->0x01eec889
RPN: 01eec PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1eecd84 pte @ 0xc1eecd84: no pmd

wiederholt sich dann bis in alle ewigkeit

ich hab die cramfs datei nochmal "entpackt"
die ucodes und die services in das entsprechende verzeichnis gepackt
da das tftpboot leer war hab ich die files vom snapshot vom 16.09. genommen
jetz bootet er so:
*edit: fehler selber gefunden, das cdkroot muste yaddroot heissen, aber jetz kommt wieder der fehler von oben