************************************************************
Beim normalen Start kommt folgender Log.
$debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-7e.a8.1f.07.00.00-63
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 200660
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .........
.LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: framebuffer on ttyS0
2: framebuffer on fb0
3: framebuffer on null
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load compleate: 647481 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647417 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
=>
************************************************************
Beim versuch ein Image zu flashen kommt folgendes.
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-7e.a8.1f.07.00.00-63
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.100.10, My IP 192.168.100.4
debug: Sending TFTP-request for file D/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1f-7f-2e
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 0.0.0.0; our IP address is 192.168.100.200; sending throught ga
teway 192.168.100.1
Filename 'logo-lcd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: T T T T T T T T T
Retry count exceeded; starting again
************************************************************
Ich hab auch keinen Schimmer, wo er die 192.168.100.200 her nimmt.
***MAC address: 00:50:BF:90:E2:61 Local IP: 192.168.100.10
***BootP server started... Port 67
***TFTP server started... Port 69
Ist meine Box zu retten?
mfg
Rene