nachdem ich jetzt endlich linux installiert habe, den compiler etc. eingerichtet habe, habe ich versucht (wie fuer einen anfaenger empfohlen), aus dem CVS das aktuelle realease zu ziehen, und daraus ein YADD zu erstellen, um dieses im bootmanager zu starten.
hier meine erfahrung:
-> es fehlen ziemlich viele archive, die ich mir im internet zusammensuchen musste, vielleicht habe ich dadurch ein problem ?
-> irgendwann war der make download jedenfalls zufrieden
-> bei erstellung des YADD's (make all) kam dann ein fehler im enigma (dies war mir aber jetzt egal, habe das mit touch .enigma uebergangen), ich waere schon froh, wenn ich am anfang neutrino zum laufen bringe
-> nun habe ich noch die ucode's in's cdkroot reinkopiert und versucht das image zu booten...
nun zu meinem problem:
- ich habe eine nokia-kabel-box und im suchlauf werden keine sender gefunden ! der suchlauf laueft unendlich lange, liefert keine ergebnisse, ich kann ihn nur durch ausschalten der box beenden.
(der suchlauf im LCARS tut !!)
- ich kann auch nur telekom/lsh auswaehlen ? ist das das problem ?
- ich habe auch schon probiert die services.xml und bouquets.xml aus meinem AlexW 1.6.10 in's ..tuxbox/config/zapit zu stellen, auch dies fuehrt zu keinem ergebnis !
ERGÄNZUNG:
die services vom AlexW werden zwar geladen, es kommt aber eine fehlermeldung (VOLTAGE, TONE ?) und weiterhin die meldung im neutrino:
keine kanäle gefunden, bitte suchlauf machen....
~ # killall zapit
~ # zapit
$Id: zapit.cpp,v 1.266.2.2 2002/10/28 22:57:18 thegoodguy Exp $[getservices.cpp] going to parse cable Telekom
[zapit] LoadServices: success
[zapit] reading Bouquets .
[zapit] Found 1 bouquets.
[zapit] channels have been loaded succesfully
SEC_SET_TONE: Invalid argument
SEC_SET_VOLTAGE: Invalid argument
~ #
-> bin fuer jede hilfe dankbar !
-> anbei mein bootlog !
der Anfänger Tekla
bootlog:
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CPlugins] Dir: /lib/tuxbox/plugins/
[CPlugins] 9 plugins found...
[zapit] set diseqc type 0
[zapit] set diseqc repeats to 0
[zapit] adding Telekom/Ish (diseqc 0)
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-41.fd.19.07.00.00-e4
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.30.4, My IP 192.168.30.51
debug: Sending TFTP-request for file C/tftboot/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 219460
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Sep 8 2003 - 14:53:33)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-40-b2-a0
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.30.4; our IP address is 192.168.30.51
Filename 'C/tftboot/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2AD8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.30.4; our IP address is 192.168.30.51
Filename 'C/tftboot/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ######
FB logo at: 0x0 (0x1FD2AD8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.30.4; our IP address is 192.168.30.51
Filename 'C/tftboot/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
######################################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 718065 Bytes = 701 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (dbox2@tekla) (gcc version 3.2.2) #1 Mon Sep 8 14:5
4:35 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.30.4:C/tftbo
ot/cdkroot/ ip=192.168.30.51:192.168.30.4:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30644k available (1244k kernel code, 404k data, 76k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:40:b2:a0
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.30.51, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.30.51, domain=, nis-domain=(none),
bootserver=192.168.30.4, rootserver=192.168.30.4, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Looking up port of RPC 100003/2 on 192.168.30.4
Looking up port of RPC 100005/1 on 192.168.30.4
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 76k init
init started: BusyBox v0.60.4 (2003.09.08-12:51+0000) multi-callUsing /lib/modu
les/2.4.20-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: 7a
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1820
Using /lib/modules/2.4.20-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
insmod: input: no module by that name found
insmod: keybdev: no module by that name found
insmod: mousedev: no module by that name found
insmod: joydev: no module by that name found
insmod: evdev: no module by that name found
Using /lib/modules/2.4.20-dbox2/misc/dvb_frontend.o
Using /lib/modules/2.4.20-dbox2/misc/dvb_filter.o
Using /lib/modules/2.4.20-dbox2/misc/dmxdev.o
Using /lib/modules/2.4.20-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.20-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20-dbox2/misc/avia_av.o
Using /lib/modules/2.4.20-dbox2/misc/dvbdev.o
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt.o
write 1 event's ...
write 1 event's ...
avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.2.2 2003/04/10 14:53:43 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12 2002/10/03 13:32:36 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_dvr.o
avia_gt_dvr: $Id: avia_gt_dvr.c,v 1.9 2002/10/03 12:47:57 Jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.2.4 2003/03/19 19:43:12 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
avia_gt_core: masking unhandled irq reg 0 bit 6
Using /lib/modules/2.4.20-dbox2/misc/dvb.o
dvb.c: init_dvb
Using /lib/modules/2.4.20-dbox2/misc/ves1820.o
$Id: ves1820.c,v 1.34 2002/10/08 23:18:42 obi Exp $
i2c-core.o: driver VES1820 DVB-C Demodulator registered.
VES1820: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
VES1820: attached to adapter
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20-dbox2/misc/dvb_net.o
dvb_net: $Id: dvb_net.c,v 1.6 2002/08/12 18:24:05 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Please press Enter to activate this console. [LCD-FONT] initializing core...
[LCD-FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCD-FONT] Intializing font cache...
[LCD-FONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.139.2.3 2003/03/11 15:30:25 thegoodguy Exp $
caching 504 hours
events are old 60min after their end time
camd2: No such file or directory
$Id: zapit.cpp,v 1.266.2.2 2002/10/28 22:57:18 thegoodguy Exp $
/var/tuxbox/config/zapit/zapit.conf: No such file or directory
[zapit] /var/tuxbox/config/zapit/zapit.conf not found
/var/tuxbox/config/zapit/services.xml: No such file or directory
[zapit] error parsing services!
SEC_SET_TONE: Invalid argument
SEC_SET_VOLTAGE: Invalid argument
Network LCD-Driver $Id: lcdd.cpp,v 1.57 2002/10/17 10:16:35 thegoodguy Exp $
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
[LCD-FONT] initializing core...
[LCD-FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCD-FONT] Intializing font cache...
[LCD-FONT] FTC_Face_Requester (Micron/Regular)
Controld $Id: controld.cpp,v 1.76.2.1 2002/10/24 20:34:32 thegoodguy Exp $
/var/tuxbox/config/controld.conf: No such file or directory
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.344 2002/10/16 16:25:24 dirch Exp $
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CPlugins] Dir: /lib/tuxbox/plugins/
[CPlugins] 9 plugins found...
