Hi
kann die neuen YADD's von Homar nicht booten, was brauch ich denn als Bootfile?
Habe die "u-boot" genommen, da das ppcboot nichtmehr dabei ist, aber es kommt aufm lcd der box nur noch "loading kernel" und das wars ;(
YADD Boot Problem
-
- Erleuchteter
- Beiträge: 432
- Registriert: Sonntag 1. September 2002, 10:51
YADD Boot Problem
DBox 2 Nokia SAT 2xIntel Avia500, cdk.cramfs: JtG 12.02.05, Ucode.bin: 00F0, SPTS OFF, PMT-Update ON, HW-Section ON[/color]]
-
- Erleuchteter
- Beiträge: 432
- Registriert: Sonntag 1. September 2002, 10:51
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-4f.a0.e0.06.00.00-c7
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.3, My IP 192.168.0.4
debug: Sending TFTP-request for file C/Download/YADD/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 145172
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Sep 5 2003 - 15:21:51)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.
find_inode failed for name=u-boot.conf
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
find_inode failed for name=logo-lcd
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1
*** ERROR: `serverip' not set
can't find logo
find_inode failed for name=logo-fb
load: Failed to find inode
can't find logo in flash - try network
BOOTP broadcast 1
*** ERROR: `serverip' not set
can't find logo
Options:
1: Bootmeldungen auf Seriell (ttyS0) - standard
2: Bootmeldungen auf TV (fb0)
3: Keine Bootmeldungen
4: Flashen via YADD
- Flashimage umbennenn in dboxflash.img
- in das Verzeichniss tftpboot kopieren
- beim Bootvorgang die Taste 4 drcken.
HAVE FUN...
...special u-boot v0.4.0 for DboxBootmanager
patched by Homar 2003
Select option (1-4), other keys to stop autoboot: 0
*** ERROR: `serverip' not set
..............................................................
Un-Protected 62 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-4f.a0.e0.06.00.00-c7
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.3, My IP 192.168.0.4
debug: Sending TFTP-request for file C/Download/YADD/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 145172
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Sep 5 2003 - 15:21:51)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .

find_inode failed for name=u-boot.conf
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
find_inode failed for name=logo-lcd
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1
*** ERROR: `serverip' not set
can't find logo
find_inode failed for name=logo-fb
load: Failed to find inode
can't find logo in flash - try network
BOOTP broadcast 1
*** ERROR: `serverip' not set
can't find logo
Options:
1: Bootmeldungen auf Seriell (ttyS0) - standard
2: Bootmeldungen auf TV (fb0)
3: Keine Bootmeldungen
4: Flashen via YADD
- Flashimage umbennenn in dboxflash.img
- in das Verzeichniss tftpboot kopieren
- beim Bootvorgang die Taste 4 drcken.
HAVE FUN...
...special u-boot v0.4.0 for DboxBootmanager
patched by Homar 2003

Select option (1-4), other keys to stop autoboot: 0
*** ERROR: `serverip' not set
..............................................................
Un-Protected 62 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>
DBox 2 Nokia SAT 2xIntel Avia500, cdk.cramfs: JtG 12.02.05, Ucode.bin: 00F0, SPTS OFF, PMT-Update ON, HW-Section ON[/color]]
-
- Erleuchteter
- Beiträge: 432
- Registriert: Sonntag 1. September 2002, 10:51
ja, ist unter windows, habe das auf 2 verschiedenen pc's versucht, selbe ergebnis.
komisch nur, als ich das letzte mal ein YADD startete (damals noch ohne u-boot) ging alles einwandfrei?
irgendwelche vorschläge?
MfG
DJ
komisch nur, als ich das letzte mal ein YADD startete (damals noch ohne u-boot) ging alles einwandfrei?
irgendwelche vorschläge?
MfG
DJ
DBox 2 Nokia SAT 2xIntel Avia500, cdk.cramfs: JtG 12.02.05, Ucode.bin: 00F0, SPTS OFF, PMT-Update ON, HW-Section ON[/color]]