ich hab ein problem, ich bekomme keinen netzwerk verbindung zu nokia dbox!
ich hab win xp und alles wichtige eingeschaltet. ich weiß nicht was ich falsch mache!!! hier ist das log:
.debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-57.9e.2c.07.00.00-9b
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.202, My IP 192.168.0.23
debug: Sending TFTP-request for file D/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file D/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file D/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file D/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file D/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file D/Programme/DBoxBoot/ppcboot_writeflash
debug:
TFTP failed, giving up...
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 200660
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........

LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: framebuffer on ttyS0
2: framebuffer on fb0
3: framebuffer on null
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load compleate: 650305 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647417 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
=>
=>
woran könnte es liegen?? bitte helft mir, ich doctor hier schon 5 tage dran rum!!! danke im voraus!!!