Ich besitze eine Nokia 2*I für Kabel. Sie findet keine Sender.
Ich hab schon verschiedene Versionen von AlexW durch. Kein Erfolg.
Dann hab ich alle Spannungen gemessen, laut http://www.dbox2hardware.de/Dbox2-Hardw ... ungen.html. Auch alles i. O.
Jetzt kommt aber das komische:
Mal startet die Box normal und ca. jedes dritte Mal mit ganz komischen Meldungen im Bootlog. Aber seht selbst:
Zuerst das Bootlog eines geglückten Starts:
fdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-80.46.41.07.00.00-b7
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Fre Feb 28 20:20:56 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:41:a3:b0
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.2 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init VES1820
Using /lib/modules/2.4.20/misc/ves1820.o
$Id: ves1820.c,v 1.34 2002/10/08 23:18:42 obi Exp $
i2c-core.o: driver VES1820 DVB-C Demodulator registered.
VES1820: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
VES1820: attached to adapter
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.4 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
Using /lib/modules/2.4.20/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
cdkVcInfo $Id: cdkVcInfo.c,v 1.2 2003/03/02 23:28:32 alexW Exp $
$Id: sectionsd.cpp,v 1.164 2003/03/03 13:38:33 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.290.2.12 2003/03/03 11:18:41 alexw Exp $
Controld $Id: controld.cpp,v 1.99 2003/03/04 16:33:16 alexw Exp $
[controld] Boxtype detected: (1)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.421 2003/03/03 22:19:15 mws Exp $
[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[camd] no card is in slot #2
[camd] no card is in slot #1
IP : 192.168.0.3
Netmask : 255.255.255.0
Broadcast: 192.168.0.255
Gateway :
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CFrontend::getEvent] FE_COMPLETION_EV: freq 378000
[dmx.cpp:readDmx:289] DMX_READ: Connection timed out
zap failed!
Wie gesagt, auch hier keine Sender.
Dann ein missglückter Start ab „der Moment ist gekommen“, alles davor ist noch ok:
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
i2c-CAM read error.
Using /lib/modules/2.4.20/misc/dmxdev.o
write 1 event's ...2.4.20/misc/dvb_frontend.o
write 1 event's ...
AV
Using /lib/modules/2.4.20/misc/a1
a_vi_cgte:orId $av: _giacot_.cre 1,v3..21 4.03202//0 118324:6 :4exalExw $
agta_or_c ae:odutecetngtihi ctyp ..peAV. GiA fTXndouav p vi
_giagtt_ $x:: Idiaavt__gx.gtv c,171.00 2092/5 /1:018266:ol JExt $
agta_cc_a: eld:$Ivi agta_cc_a.cel 1,v.4.8 2.13/00/102148 2::3 a46xwlexp E
$iaavt__grecoma: inskung ndhad leq irg rebi1 11t av
_giacot_: reskmag inhaunlendird req 1 g t bi
13iaavt__gx:dmId $av: _giadmt_c,x.1.v 9.131.2.1 2.03202//0 118324:6 :4exalExw $
p
a7ta_mx_dSu: escculsf llydeoaucd e od1.VB
a.a_vi_dgt: mxrnwag,inis migald neeuqu0 e s (i320x0,A0iz s65e 6)53al, niig..ng
a_vi_ggt $v:: Idiaavt__g.cgv 1,v5..22 4.03203//0 004448:9 :3enzwxp E
$iaavt__g: gvt_sepuinsit_ (zedtwi72h= h0,ghei57t=
6)iaavt__gm:pcId $av: _giapct_c,m.1.v .419 2.13/00/102148 2::3 a46xwlexp E
a$iaavt__gptcae:urId $av: _giacat_urptc,e.1.v 2222/00/208132 9::3 J33t olp Ex
a_vi_pgt: igd:$Ivi agta_ig_p,v.c.2 1208 /002228/3: 1:339Jo3 Elt $xpav
a$iairt_$I: ad:a_vi_igtc,r.1.v 2192/00/208132 9::3 J33t olp Ex
a_vi_cgte:oroa Ld deiAAVNX eTX/Gri dr
Using /lib/modules/2.4.20/misc/ddv vevb.o
Init VES1820b
Using /lib/modules/2.4.20/misc/ve
: Ids1ve0.82v c,341.00 2102/8 /0:123428:bi oxp E
$c-i2reco: .oivdr Ver18ES D20-CVBem Dulodorateg rteisd.re[A
] VSc i2roer-1r
21c-i2M CAadrerr e.
i1iS] e2corrr12 - orAV
-C2c rAMd earoer
Using /lib/modules/2.4.20/misc/avvi
agta_ap_n $i:: Idiaavt__gpina,v.c.1 1.241.2.1
2.13/00/102148 2::3 a46xwlexp E
$iaavt__gpinaha: ward sretiec fonteilngriis dleab
Using /lib/modules/2.4.20/misc/avvi
agta_bi_v$I: ad:a_vi_vgt.cbi 1,v7..11 4.0320
2//0 118324:6 :4exalExw $
Using /lib/modules/2.4.20/misc/aXeNA GTX/
a_vi_fgt $b:: Idiaavt__g_cfbe.orv c,381..4.400 2033/4 /0:408394:we zExn $
agta_v:_get snp_i_mute odod(m2)e=av p vi
_giagvt_se: int_t_puzesiwi (h=dt0,72ei ht=gh6)57av
a)iagvt_se: int_t_pudemomo (=2de
a)a_vi_ggt sv:_ietutnpiz_s(we thid20=7he, htig76=5
a_vi_ggt sv:_ietutnpod_m(me e=od
2)iaavt__g: gvt_sepuinsit_ (zedtwi72h= h0,ghei57t=
6)nsCoe:olwi shitc tngcoo urlora f bmefeufder cevi2x 8
Using /lib/modules/2.4.20/misc/ae ebamfeuffrr e amffbu dericev
a_vis:osId $av: _giaost_c,s.1.v .412 2.13/00/102148 2::3 a46xwlexp E
Using /lib/modules/2.4.20/misc/avvi
agta_ir_l $c:: Idiaavt__grcli,v.c.4 100 2082/
2 /2:313339:ol JExt $
p
CXA2092 foundVS[Ai2] erc r ro21-1i2
[.c-reM eadorrr
S]AV2c irr e -or1
12
CXA2092 foundVS[Ai2] erc r ro21-1i2
[.c-reM eadorrr
S]AV2c irr e -or1
Using /lib/modules/2.4.20/misc/lcdkVcInfo $Id: cdkVcInfo.c,v 1.2
lelc io:t nid lcivdr merulod
2003/03/02 23:28:32 alexW Exp $1cderntcefan o
$Id: sectionsd.cpp,v 1.164 2003/0
caching 504 hours
$Id: zapit.cpp,v 1.290.2.12 2003/ET_INFO: Operation not permitted $
[frontend.cpp:C
Frontend:67] FE_G[zapit] unable to open frontend d
Controld $Id: controld.cpp,v 1.evices. bye.
99 2003/03/04 16:33:16 alexw Exp $[controld] Boxtype detected: (1)
et
sve e: nt00000900[nhttpd] Neutrino HTTP-Server sta
/tmp/zapit.sock: No such file or ng..
/tmp/zapit.sock: No such file or ectory
/tmp/zapit.sock: No such file or ectory
-C2c rAMd earoer
r.no.cpp,v 1.421 2003/03/03 22:19:1[neutrino] NeutrinoNG $Id: neutri
createdxp $
[neutrino] frameBuffer Instance 1024k video mem
vi
agta_v:_get snp_i_mute odod(m2)e=av
_giagvt_se: int_t_puzesiwi (h=dt0,72ei ht=gh6)57[neutrino] enable flash
ed
[neutrino] Software update enabl[lcdd] time-skin not found -> usi
[lcdd] weekday-skin not found ->ng default...
[lcdd] date-skin not found -> us using default...
[lcdd] month-skin not found -> uing default...
[LCDFONT] adding font /share/fontg default...
s/micron.ttf...OK (Micron/Regular)
[LCDFONT] FTC_Face_Requester (Mic..ron/Regular)
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] receive failed: /[basic
socket] receive timed out.
/tmp/zapit.sock: No such file or /controld.sock
[neutrino] Loading of scan settidirectory
S]AV2c irr e -or1g defaults.
12
[CBasicClient] connect failed.
[sectionsd] getUTC: read: Connect2crectoryion timed out
iAM-Cea rerd r.ro[basicsocket] receive timed
out.
tmp/controld.sock
[CBasicClient] receive failed: /[basicsocket] receive timed out
.
tmp/controld.sock
[CBasicClient] receive failed: /[CBasicClient] connect failed.
directory
/tmp/zapit.sock: No such file or[sectionsd] getUTC: read: Connect
S]AV2c irr e -or1
12
Wie ihr seht, nur noch Quatsch. Nichmal mehr zusammenhängende Sätze.
Es wäre sehr schön wenn mir jemand sagen könnte, woran das liegt.
Ich vermute ja mal am I2C, wenn ihr der gleichen Meinung seid, dann wüsste ich noch gern, ob dieser im Tuner steckt und ob es dann ausreicht mir einen neuen Tuner anstatt einer neuen Box zu beschaffen.
Danke für die Hilfe im Vorraus!
