***Adapter Desc: Realtek 8139-series PCI NIC (Microsoft's Packet Scheduler)
***MAC address: 00:C0:DF:0D:73:27 Local IP: 192.168.0.21 (via Packet-Driver #0)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\Programme\DBoxBoot\ppcboot_writeflash"...
TFTP> Transfer finished, sent 394 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\Programme\DBoxBoot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\Programme\DBoxBoot\logo-fb"...
TFTP> Transfer finished, sent 85 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\kernel-cdk"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\kernel-cdk"
*debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-49.f8.1d.07.00.00-99
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.21, My IP 192.168.0.20
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1d-69-e0
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.21; our IP address is 192.168.0.20
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.21; our IP address is 192.168.0.20
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.21; our IP address is 192.168.0.20
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T