hallo !!
ich habe hier eine nokia sat box 2xi die nur noch loopt =(
hier das log
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-b6.64.23.07.00.00-04
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168,1.7
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop...
deb
ug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: Calibrating delay loop...
deb
ug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: write to 0x22/0x05 failed, rc -5
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-b6.64.23.07.00.00-04
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.7
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1a-73-c5
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
Bus Fault @ 0x01fd2f08, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fa30 Unknown values in msr
NIP: 01FD2F08 XER: A000BF77 LR: 01FD2F04 REGS: 01f9fa30 TRAP: 0200 DAR:
FFFFFFFB
MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00
GPR00: 01FD2F04 01F9FB20 00000000 000000A6 01FD40F8 01FE8379 00000044
0000012C
GPR08: 00000000 FFFFFFFF FF002820 FF002820 35333095 00031B58 01FE7100
01F80000
GPR16: 00000000 00000000 64FF002E 00800000 80004000 00000001 00000008
00002580
GPR24: 01FDEB8C 01F9FFC0 01FDEB94 00130000 01FE0FE4 00000000 01F9FB20
01FD2EBC
Call backtrace:
01FD2F04 D6C3FFFF
machine check
### ERROR ### Please RESET the board ###
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: write to 0x22/0x05 failed, rc -5
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
flashen lässt sich die box auch nicht nur ab und zu da gehts ?!...
hmm wenn es der boot loader ist kann ich den igendwie neu flashen ?
Nokia 2xi Sat Looopt =(((((
-
- Neugieriger
- Beiträge: 16
- Registriert: Samstag 20. April 2002, 03:47
-
- GOD
- Beiträge: 409
- Registriert: Sonntag 22. Juli 2001, 00:00
Re: Nokia 2xi Sat Looopt =(((((
... ich glaub eher an ein Hardware-defekt (kalte Lötstelle(n) usw.)checker hat geschrieben: hmm wenn es der boot loader ist kann ich den igendwie neu flashen ?
cu