Was bedeutet fp.o: RC overflow. ?

Boxenweitwurf
dwilx

Was bedeutet fp.o: RC overflow. ?

Beitrag von dwilx »

Ich habe hier eine Nokia die von selbst die Kanäle umschaltet :o
Im Log sieht man das in den letzten Zeilen (fp.o: RC overflow). Das geht unnunterbrochen. Die Box reagiert dann auch nicht mehr auf die Fernbedienung. Bei der Betanova schaltet die Box ebenfalls immer um. Auch wenn die Box unter Betanova ausgeschaltet ist, schaltet sie sich nach kurzer Zeit wieder ein. Was könnte die Box für ein Problem haben? Lässt sich das beheben? Danke im Voraus!

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1e:99:b5
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 9, console /dev/console: '/etc/init.d/rcS') multi-ca
Using /lib/modules/2.4.20-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
ifup: Ignoring unknown interface net
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
ifup: Ignoring unknown interface loopback
Using /lib/modules/2.4.20-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20-dbox2/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.20-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.20-dbox2/misc/avia.o
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...write 1 event's ...
write 1 event's ...
OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Using /lib/modules/2.4.20-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20-dbox2/misc/dmxdev.o
Using /lib/modules/2.4.20-dbox2/misc/dvb_frontend.o
Using /lib/modules/2.4.20-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.2 2003/04/14 14:11:33 alexw Exp $
avia_gt_dmx: Unable to load firmware file '/var/tuxbox/ucodes/ucode.bin'
avia_gt_dmx: Successfully loaded ucode V0.14
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.3 2003/04/10 14:54:22 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20-dbox2/misc/dvb.o
dvb.c: init_dvb
Init VES1820
Using /lib/modules/2.4.20-dbox2/misc/ves1820.o
$Id: ves1820.c,v 1.34 2002/10/08 23:18:42 obi Exp $
i2c-core.o: driver VES1820 DVB-C Demodulator registered.
VES1820: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
VES1820: attached to adapter

Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering enabled.
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.5 2003/03/05 09:00:31 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
cdkVcInfo $Id: cdkVcInfo.c,v 1.2.1 2003/03/13 15:11:22 alexW Exp $

$Id: sectionsd.cpp,v 1.166 2003/03/14 04:27:55 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] Unknown 1.CMD-Class 03
[camd] no card is in slot #2
[camd] no card is in slot #1
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.290.2.18 2003/03/27 11:04:52 thegoodguy Exp $
$Id: controld.cpp,v 1.104 2003/03/19 20:59:02 thegoodguy Exp $

[controld] Boxtype detected: (1)
set event: 00000009
[controld] Unknown aspectRatio: 0[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] no card is in slot #1
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.433 2003/04/01 17:30:24 thegoodguy E
xp $

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
fp.o: RC overflow.
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[controld] setting VideoFormat to auto
video notify: videomenu.videoformat
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
open: No such file or directory
[neutrino] initialized everything
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
[CFrontend::getEvent] timeout
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
[CFrontend::getEvent] timeout
fp.o: RC overflow.
[CFrontend::getEvent] timeout
fp.o: RC overflow.
fp.o: RC overflow.
[CFrontend::getEvent] timeout
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
[CFrontend::getEvent] timeout
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
fp.o: RC overflow.
[CFrontend::getEvent] timeout
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
[CFrontend::getEvent] timeout
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
[CFrontend::getEvent] timeout
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
[CFrontend::getEvent] timeout
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
fp.o: RC overflow.
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
zap failed!
fp.o: RC overflow.
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
zap failed!
[CFrontend::getEvent] timeout
zap failed!

An diesem "zap failed!" nicht stören, war keine Antenne dran!
Nach oben
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Entweder hast Du einen hinterhältigen Nachbarn, der mit seiner Fernbedienung auf die Box zielt oder der Frontprozessor hat ne Macke ;)
There are 10 types of people in the world: those who know binary and those who don't
Nach oben
dwilx

Beitrag von dwilx »

Na gut, hab ich auch vermutet. Soll dass bedeuten, dass ich den Prozessor wechseln muß (?woher nehmen???) oder könnte das noch andere Ursachen haben, da ja die Box nicht immer so muckt. Das Teil funktioniert ab und zu normal, soll heißen, dass sich die Box sich wieder fängt und dann auch wieder normal auf die FB reagiert. Etwa ein Kondenstor, Transistor oder was auch immer?
Nach oben
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Es könnte alles mögliche (und unmögliche) sein - das kann man nur noch per Tests oder "try and error"-Tausch feststellen.
There are 10 types of people in the world: those who know binary and those who don't
Nach oben
nixblicker74
Einsteiger
Einsteiger
Beiträge: 265
Registriert: Donnerstag 24. April 2003, 21:13

Beitrag von nixblicker74 »

Wann tretten die fehler auf , immer wenn das Licht an ist ?
Da gibt es nämlich auch so schöne Phenomäne
wenn du ne billige Sparlampe in der Nähe hast ,
die da UV Strahlungstechnisch etwas stört .

mfG nixi :wink:
Nach oben
dwilx

Beitrag von dwilx »

@nixblicker74
:D NEEE. Blödsinn! *g* Da hätte das ja bei meinen anderen Geräten auch sein müssen. Ich werde da mal etwas rum probieren.
Nach oben

Zurück zu „Hardware“