hier das bootlog von Dbox2 manager:Linux version 2.4.2 (
steffen@sr01.sth-serv.de) (gcc version 3.0.3) #1 Fri Jan 11
00:16:01 CET 2002
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.30:C/dbox/yadd/
cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.30:C/dbox/
yadd/cdkroot/
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30584k available (1116k kernel code, 432k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20218kB/6739kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:40:7e:36
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.30, my address is 192.168.0.42
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.30
Looking up port of RPC 100005/2 on 192.168.0.30
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k int
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.60.1 (2002.01.06-17:12+0000) multi
-call Setting hostname
hostname: not found
Mounting anything
Starting inetd
Loading modules
Real Time Clock Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: 7a
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1820
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
event: init ...
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 1
).
write event ...
write event ...
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 2).
CAM: attached to adapter
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 3).
registering device.
i2c-core.o: driver VES1820 DVB DECODER registered.
ves1820.o: feID: 1820 7a
ves1820.o: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
ves1820.o: init chip
ves1820.o: pwm=00
using QAM
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
gen_dmx: found gtx
avia_vbi: version (Jan 12 2002-01:00:28)
avia_vbi: got demux C-Cube - AViA GTX/DMX
$Id: gtx_capture.c,v 1.3 2001/12/01 06:37:06 gillem Exp $
gtx_pig: init
gtx_pig: WIDTH=160, S=0, HEIGHT=144
lcd.o: LCD driver (KS0713) module
Starting loopback device
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
1$Id: sectionsd.cpp,v 1.89 2002/01/06 18:23:44 McClean Exp $
caching 120 hours
events are old 60min after their end time
set_pid_control_table, index 3 -> queue 3, pid 11
set_pid_control_table, index 3 -> queue 3, pid 11
CHCH [DEMUX] START 3
update pid 11: 1 times used.
enabling tap 3 (pid: 11)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 14
set_pid_control_table, index 4 -> queue 4, pid 14
CHCH [DEMUX] START 4
update pid 14: 1 times used.
enabling tap 4 (pid: 14)
set_pid_control_table, index 4 -> queue 4, pid 14
update pid 14: 0 times used.
disabling tap 4 (pid: 14)
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 14
set_pid_control_table, index 4 -> queue 4, pid 14
CHCH [DEMUX] START 4
update pid 14: 1 times used.
enabling tap 4 (pid: 14)
cp: /var/tuxbox/config/zapit/last_chan: No such file or directory
Zapit $Id: zapit.cpp,v 1.61 2002/01/12 22:05:32 Simplex Exp $
[zapit] fopen: /tmp/zapit_last_chan: No such file or directory
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
Poll timeout
[zapit] CAID is: 1722
[zapit] /var/tuxbox/config/zapit/services.xml: No such file or directory
[zapit] /var/tuxbox/config/zapit/bouquets.xml: No such file or directory
[zapit] channels have been loaded succesfully
[zapit] we have got 0 tv- and 0 radio-channels
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
Network LCD-Driver 0.1
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
Controld 0.1
[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
SWITCH LETTER BOX
Neutrino HTTP-Server started..
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
NeutrinoNG $Id: neutrino.cpp,v 1.128 2002/01/11 00:09:10 McClean Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supported
error while loading settings: /var/tuxbox/config/neutrino.conf
using defaults...
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[FONT] FTC_Face_Requester (Arial/Bold)
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
[FONT] FTC_Face_Requester (Arial Black/Regular)
That was returned: 00t
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! !!
!! ATTENTION, YOUR CARD DOES NOT MATCH CAMALPHA.BIN!!
!! !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[zapit] fopen: /tmp/zapit_last_chan: No such file or directory
Changed to TV-mode
tv_channellist is empty
Wrong Command was send for channelsInit(). Exiting.
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
set_pid_control_table, index 3 -> queue 3, pid 11
update pid 11: 0 times used.
disabling tap 3 (pid: 11)
set_pid_control_table, index 3 -> queue 3, pid 11
set_pid_control_table, index 3 -> queue 3, pid 11
CHCH [DEMUX] START 3
update pid 11: 1 times used.
enabling tap 3 (pid: 11)
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 14
update pid 14: 0 times used.
disabling tap 4 (pid: 14)
set_pid_control_table, index 4 -> queue 4, pid 14
set_pid_control_table, index 4 -> queue 4, pid 14
CHCH [DEMUX] START 4
update pid 14: 1 times used.
enabling tap 4 (pid: 14)
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, pid 12
set_pid_control_table, index 5 -> queue 5, pid 12
CHCH [DEMUX] START 5
update pid 12: 1 times used.
enabling tap 5 (pid: 12)
set_pid_control_table, index 5 -> queue 5, pid 12
update pid 12: 0 times used.
disabling tap 5 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 5 -> queue 5, p
(Und nirgendwo steht,wenn etwas nicht funktioniert hat,wie das ausschaut und was mann (bzw frau:-)),dann macht.ich würde es heute jedenfalls endlich mal in Angriff nehmen.habe auch bereits schon die Box geöffnet,die 2 intelflashs gefunden (laut bild) und dieselbe mit dem PC verbunden.per netzwerkkarte hat er sie erkannt,aber wenn ich sie starte erscheint nix auf dem hyperterminal.nur ein punkt.das nullmodenkabel scheint aber i,.o, zu sein.die Einstellungen für die com sind auch richtig eingestellt.und da ist schon das erste "hinderniss" da es ja eigentlich nirgendwo nachzulesen ist,bezüglich der möglichen Fehler und was dann gemacht werden sollte.
einspruch !
