also hab ein Problem mit meiner Kabel Dbox2 von Nokia mit 2xI:
Kanalsuchlauf ist erfolgreich und er findet auch alles, wenn ich die freien sender dann anschauen will kommt bei den meisten nur ein schwarzes Bild und "warte auf EPG-Informationen" die Box stürzt dann ab und man muss reseten. Gleiches passiert auch wenn ich fertige services einspiele.
Hab den BFG und den 10R davor getauscht, weil das durchgeschleifte signal nicht so toll war, jetzt ist das signal besser, aber oben genannter fehler besteht noch...
LOG:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPSC36D2000 0000
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-0c.e1.1c.07.00.00-07
G: 240000
debug: HWrev X5 SWrev 0.810 0782C1509E00 C8CFF000 900
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
bllk
dbox2:root> debug:
: FF7FFFFF00 C8CF
BOOTP/TFTP bootstrap loader (v0.3)BCC0C F602
debug:
debug: Transmitting BOOTP request via broadcast 7BFB0FE06500 16D0C0F4 6CF6 12C0F000 080F6C00
debug: Given up BOOTP/TFTP boot
boot net failed 00fp
Flash-FS bootstrap loader (v1.5)
: .o oRCrfvew.lo
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/o
Branching to 0x40000
CAM
PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)i2c-core.o: client [DBOX2-CAM] registered to ad
CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
CAM: attached to adapter
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Using /lib/modules/2.4.20-dbox2/misc/dmxdev.o
Watchdog enabled
[LCDFONT]
Board: DBOX2, NokiaUsing /lib/modules/
I2C: readymisc/dvb_fro
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
. o
[LCDFONT] addi
LCD: readye/fonts/micr
FB: loading - readyular)
In: serial
Out: serial
[LC
Err: serialzing font cac
Options:
1: Console on null
## Booting image at 00100000 ...accel: $Id: avia_gt_accel.c,v 1.
Image Name: dbox246 alexw Exp $
Image Type: PowerPC Linux Kernel Image (gzip compressed)
avia_gt_core: masking unhandled irq reg 1 bit 11
Data Size: 635818 Bytes = 620 kB = 0 MBia_gt_core: masking unhandled irq reg 1 bit 1
Load Address: 00000000
a
Entry Point: 00000000mx.c,v 1.139.2.1.
Verifying Check
zone(1): 0 pages.
zone(2): 0 pages.
avia_gt_
Kernel command line: root=/dev/mtdblock2 console=ttyS0
avia_gt_pcm: $Id
Decrementer Frequency = 251625000/60 14:32:46 alexw Exp $
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
avi
Console: colour dummy device 80x25 2002/08/22 13:39:33 Jolt Exp
Calibrating delay loop... 66.76
Using /lib/modules/2.4.20-dbox2/misc/ves1
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)s1820.c,v 1.34 2002/10/08 23:18:42 obi Exp $
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)820 DVB-C Demodulator registered.
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)0x10
i2c-core.o: client [
POSIX conformance testing by UNIFIXs. 4).
Linux NET4.0 for Linux 2.4
VES1820: attached t
Based upon Swansea University Computer Society NET3.039s/2.4.20-dbox2/misc/avia_gt_napi.o
Initializing RT n
i2c-core.o: i2c core module17.4.1 2003/02/18 14:32:46
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
avia_gt_vbi: got demux
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configuredes/2.4.20-dbox2/misc/avia_gt_fb
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:40:99:7cia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.5 2003/03/0
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
avia_gt_g
cfi_cmdset_0001: Erase suspend on write enabled
avia_gt_gv: set_input_size (width
Using word write method
avia_gt_gv:
0x00020000-0x00040000 : "flfs (ppcboot)"
avia_gt_gv: set_input
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"ffer device 82x32
0x00020000-0x00800000 : "flash without bootloader" AViA eNX/GTX Framebuffer frame buffer device
0x00000000-0x00800000 : "complete flash"
Using /lib/modules/2.4.2
mice: PS/2 mouse device common for all mice
avia_oss:
NET4: Linux TCP/IP 1.0 for NET4.0/02/18 14:32:46 alexw Exp $
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes_lirc.o
TCP: Hash tables configured (established 2048 bind 40922
Mounted devfs on /dev/03/14 04:27:55 obi E
Freeing unused kernel memory: 60k init
caching 504 hour
Starting pid 9, console /dev/console: '/etc/init.d/rcS') multi-ca
[camd] ca system id: 1722
Using /lib/modules/2.4.20-dbox2/misc/i2c-8xx.o18 2003/03/27 11:04:52 thegoodguy Exp $
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.x/config/zapit/zapit.conf for reading
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/info.old.cpp,v 1.106 2003/04/23 13:00:12 alexw Ex
SIOCADDRT: Invalid argument
ifup: Ignoring unknown interface netle /var/tuxbox/config/controld.conf
ifup: i2c-core.o: driver FOR_PROBE_ONLY
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/avs.ocpp,v 1.433 2003/04/01 17:30:24 thegoodguy
i2c-core.o: driver i2c audio/video switch driver registered.
xp $
[neutrino] frameBuffer Insta
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).mem
avia_gt_gv: set_input_mode (mode=2)
Using /lib/modules/2.4.20-dbox2/misc/saa7126.out_size (width=720, height=576)
i2c-core.o: driver saa7126 registered.utrino] enable flash
i2c-core.o: client [saa7126] registered to adapter [](pos. 1).
[lcdd] time-skin not found -> using default...
Using /lib/modules/2.4.20-dbox2/misc/fp.o
[lcdd] weekday-skin not found -> us
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
[neutrino
Using /lib/modules/2.4.20-dbox2/misc/avia.odater] HTTP-Basepath: http://dboxupdate.ber
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1ename: cdk.cramfs
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
loading locales
Using /lib/modules/2.4.20-dbox2/misc/cam.o
CAM: attached to adapter
write 1 event's ...asking unhandled ir
write 1 event's ...
Using /lib/modules/2.4.20-dbox2/misc/dmxdev.or directory
de
Using /lib/modules/2.4.20-dbox2/misc/dvb_frontend.o
[LCDFONT] initializing core... [CFronten
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
PLETOo
: psrnke aelesccofs ad
[LCDFONT] Intializing font cache...
11P:NI00 C8FBFXE4 0
[LCDFONT] FTC_Face_Requester (Micron/Regular)409dR
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $0000 000000010000 00000100 1603 00400000 0000000000
avia_gt_core: masking unhandled irq reg 1 bit 11
16PR00: 0000 00000000 000000000000 00000000
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.3 2003/05/03 13:21:51 alexw Exp $0309FF2 FFFF
avia_gt_core: masking unhandled irq reg 0 bit 6
C 00C0DC25FE 07CFB0F8 67FB
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.3 2003/04/10 14:54:22 zwen Exp $
1080F0F0 CCCB 0B000000 00av
avia_gt_gv: set_input_size (width=720, height=576)
_ciae.or ac
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $in: tyR:PCx1 0569B137COL, CRDP0x: B5194454 D2,f:if98 7
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
w etentve.. .re ffoe di
w 1teve e'snt.. .wr u
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp
e itenev..t fi. erltk
debug: B/Ex/Fl(MB)
$Id: ves1820.c,v 1.34 2002/10/08 23:18:42 obi Exp $nabled
dbox2:root> debug:
i2c-core.o: driver VES1820 DVB-C Demodulator registered.
debug:
debug: Transmitt
VES1820: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
boot net failed
Flash-FS bootstrap l
VES1820: attached to adapter
Found Flash
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
Options:
avia_gt_gv: set_input_size (width=720, height=576)sole on ttyS0
3: Console on
avia_gt_gv: set_input_mode (mode=2)
Select (1-3), other keys to sto
avia_gt_gv: set_input_size (width=720, height=576)
.........................................
Console: switching to colour frame buffer device 82x32
Un-Protected 63 sectors
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer devicex100000
### FS l
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $e Name: dbox2
Image Type: PowerPC Linux Ke
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_lirc.o
Data Size:
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22
$Id: zapit.cpp,v 1.290.2.18 2003/03/27 11:04:52 thegoodguy Exp $
zone(0): 8192 pages.
zone(1): 0 pages
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for readingdev/mtdblock2 console=ttyS0
.D
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
$Id: controld.cpp,v 1.106 2003/04/23 13:00:12 alexw Exp $dt: keep-alive trigger activated (
[nhttpd] Neutrino HTTP-Server starting..
Inode cache hash tab
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.433 2003/04/01 17:30:24 thegoodguy E
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
xp $
[neutrino] frameBuffer Instance created
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CFrontend::getEvent] FE_COMPLETION_EV: freq 354000
[camd] starting onid 0085 sid 002a
open: No such file or directory
[neutrino] initialized everything
descramble onid: 0085 sid: 002a status: 8484
[CFrontend::getEvent] FE_COMPLETION_EV: freq 426000
Oops: kernel access of bad area, sig: 11
NIP: C00BF8F4 XER: 00000000 LR: 00000000 SP: C182FDF0 REGS: c182fd40 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0000B9B7, DSISR: 00000169
TASK = c182e000[84] 'zapit' Last syscall: 4
last math 00000000 last altivec 00000000
GPR00: 00000000 C182FDF0 C182E000 0000000C 000001F0 00000000 00000000 C182FE78
GPR08: 7FFFFFFF 0000B9AF 00000000 00000001 00000000 10031604 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 0182FF40 C121C370 0000000C
GPR24: 00000015 7FFFFFFF 00000000 C121C080 C182FE50 C00FF8C0 00009032 FFFFFF91
Call backtrace:
7FFFFFFF C00FF8C0 C00BEF50 C01003D0 C00BC3D4 C00BC65C C002F66C
C00025DC 0FEFB7C8 0FFB67BC 0FFB65E0 1000E9C8 1000C620 0FF66C2C
1000F080 0FCBCCB0 00000000
PCR discontinuity: PCR: 0x1DFC31D26, OLDPCR: 0x1DFC1FCF9, Diff: 73773
avia_core.c: avia_interrupt: Reserved 01.
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok
das wars
OOps: kernel access bad area ??? das ist ja sicher nicht normal...
vielleicht kann mir das ja mal jemand erklären...
