AKtuelles release compilat abbruch!

[servus01]

Servus,

möchte gerne das aktuelle release compilieren, doch leider bricht es mit einem Fehler ab. Das alte 1.0.0 release läuft einwandfrei durch, hätte dennoch gern das neue! Vielleicht weiss ja einer woran es liegt!

make[6]: Entering directory `/root/tuxbox/apps/tuxbox/enigma/data/pictures/chk_silver/mainmenu'
make[6]: *** No rule to make target `background-fs8.png', needed by `all-am'. Stop.
make[6]: Leaving directory `/root/tuxbox/apps/tuxbox/enigma/data/pictures/chk_silver/mainmenu'
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory `/root/tuxbox/apps/tuxbox/enigma/data/pictures/chk_silver'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/root/tuxbox/apps/tuxbox/enigma/data/pictures'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/root/tuxbox/apps/tuxbox/enigma/data'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/root/tuxbox/apps/tuxbox/enigma'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/root/tuxbox/apps/tuxbox/enigma'
make: *** [.enigma] Error 2


Vielen Dank für Eure Hilfe!

Greetz
Servus01

[dhd]

touch .enigma und ohne enigma leben ?

[servus01]

Sers,

joa ist eine Möglichkeit, leider ist damit nur das Problem umgangen und nicht gelöst! Liegts an mir oder an den sourcen? Gibts ne komplette Lösung dafür?

Greetz
Servus01

[slhermit]

cd /tuxbox-cvs/apps/tuxbox/enigma/data

cvs update -r rel_1_0_0

dann wieder im cdk

und

make all

ist die Lösung (mindestens für dieses Problem).

Mfg.
Serge.

[__Ghost__]

Hi,

zur not einfach mal im enigma dir folgendes tipseln...

automake && ./config.status --recheck
automake && ./config.status

das hilft meistens...



cya

[MattisBLN]

Hi,

zur not einfach mal im enigma dir folgendes tipseln...

automake && ./config.status --recheck
automake && ./config.status

Code: Alles auswählen

[mattis@Fanclub enigma]$ automake && ./config.status --recheck
running /bin/sh ./configure  --build=i686-pc-linux-gnu --host=powerpc-tuxbox-linux-gnu --prefix=/home/mattis/dbox2/cdkroot --with-driver=/home/mattis/tuxbox-cvs/driver --with-dvbincludes=/home/mattis/tuxbox-cvs/driver/dvb/include --with-target=cdk --enable-maintainer-mode CC=powerpc-tuxbox-linux-gnu-gcc CFLAGS=-Wall -msoft-float -mmultiple -mstring -meabi -O3 -g -pipe CXXFLAGS=-Wall -msoft-float -mmultiple -mstring -meabi -O3 -g -pipe CXX=powerpc-tuxbox-linux-gnu-g++ build_alias=i686-pc-linux-gnu host_alias=powerpc-tuxbox-linux-gnu  --no-create --no-recursion
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... found
checking for working autoconf... found
checking for working automake-1.4... found
checking for working autoheader... found
checking for working makeinfo... found
checking for powerpc-tuxbox-linux-gnu-gcc... powerpc-tuxbox-linux-gnu-gcc
checking for C compiler default output... configure: error: C compiler cannot create executables
See `config.log' for more details.
[mattis@Fanclub enigma]$

Was sagt mir die letzte Zeile, muss ich da noch was konfigurieren?

Hier zur Info noch ein Log...

Code: Alles auswählen

[mattis@Fanclub cdk]$ ./autogen.sh
Generating configuration files for tuxbox-cdk, please wait....
  aclocal
  libtoolize --automake
  autoconf
configure.ac:13: warning: AC_ARG_PROGRAM was called before AC_CANONICAL_TARGET
  automake --add-missing
[mattis@Fanclub cdk]$ ./configure --prefix=$HOME/dbox2 --with-cvsdir=$HOME/tuxbox-cvs --enable-maintainer-mode
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... found
checking for working autoconf... found
checking for working automake-1.4... found
checking for working autoheader... found
checking for working makeinfo... found
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... powerpc-tuxbox-linux-gnu
checking for apps directory... yes
checking for boot directory... yes
checking for driver directory... yes
checking for hostapps directory... yes
checking linux rules... done
checking binutils rules... done
checking bootstrap_gcc rules... done
checking glibc rules... done
checking gcc rules... done
checking uclibc rules... done
checking busybox rules... done
checking ftpd rules... done
checking inetd rules... done
checking modutils rules... done
checking netkit_telnet rules... done
checking portmap rules... done
checking procps rules... done
checking watchdog rules... done
checking libboost rules... done
checking libcommoncplusplus rules... done
checking libcrypto rules... done
checking libcurl rules... done
checking libdirectfb rules... done
checking libdirectfbpp rules... done
checking libdvbpsi rules... done
checking libexpat rules... done
checking libffi rules... done
checking libfreetype rules... done
checking libfribidi rules... done
checking libmad rules... done
checking libncurses rules... done
checking libjpeg rules... done
checking libpcap rules... done
checking libpng rules... done
checking libreadline rules... done
checking libsdl rules... done
checking libsigc rules... done
checking libvorbisidec rules... done
checking libxml2 rules... done
checking libz rules... done
checking bzip2 rules... done
checking console_data rules... done
checking console_tools rules... done
checking directfb_examples rules... done
checking fbset rules... done
checking lirc rules... done
checking lsof rules... done
checking ssh rules... done
checking tcpdump rules... done
checking xrc rules... done
checking thttpd rules... done
checking cabextract rules... done
checking msttf rules... done
checking gdb rules... done
checking ltrace rules... done
checking strace rules... done
checking nano rules... done
checking kaffe rules... done
checking kaffeh rules... done
checking gnuboy rules... done
checking scummvm rules... done
checking sdldoom rules... done
checking dvbdate rules... done
checking dvbstream rules... done
checking dvbtext rules... done
checking dvbtune rules... done
checking vls rules... done

Summary:
Hardwareruleset:        dbox2
Hostruleset:            standard
Targetruleset:          standard
Targetprefix:           /home/mattis/dbox2/cdkroot
Hostprefix:             /home/mattis/dbox2/cdk
Bootprefix:             /home/mattis/dbox2/tftpboot
Buildprefix:            /home/mattis/tuxbox-cvs/cdk
Appsdir:                /home/mattis/tuxbox-cvs/apps
Bootdir:                /home/mattis/tuxbox-cvs/boot
Driverdir:              /home/mattis/tuxbox-cvs/driver
Hostappsdir:            /home/mattis/tuxbox-cvs/hostapps

configure: creating Makefile-archive
configure: creating ./config.status
config.status: creating Makefile
config.status: creating root/Makefile
config.status: creating root/etc/Makefile
config.status: creating root/etc/init.d/Makefile
config.status: creating root/etc/network/Makefile
config.status: creating root/share/Makefile
config.status: creating root/share/udhcpc/Makefile
[mattis@Fanclub cdk]$

Sollte ich das cvs-root nochmal komplett löschen und die o.g. Tipps ausführen, bevor ich die INSTALL.en weiter verfolge?

Meine Konfiguration:

Mandrake Linux 9.1
-cvs
-autoconf 2.50
-automake 1.4.21 p6
-libtool 1.4.3-1
-gettext 0.1.5-2
-make 3.80-3
-makeinfo (texinfo) fehlt evtl.
-bunzip2 setze ich als in der Shell vorhanden voraus
-gunzip ebenfalls
-tar ebenfalls, ich habe jedenfalls keine entspr. Pakete gefunden
-patch 2.5.8-1
-ncurses 5.3-1
-gcc 3.2.2-3
-g++ 3.2.2-3
-pyacc
-flex 2.5.4a
-bison 1.35-3
-pkg-config 0.15.0-1

Muss ich mit dem Compiler noch irgendwas machen, damit er funktioniert?

Danke für eure Hilfe schonmal vorab!

Matthias