D-Box hängt sich bei Loading Neutrino... auf

Beitrag von **Ace** » Sonntag 13. April 2003, 15:21

Hi leutz,
Ich habe grad eben versucht meine cdk.cramfs up zu daten.Hat alles super gefunzt aber nach dem reboot bleibt die Box hängen bei Loading Linux.Wie kann ich das wieder hinbekommen?Manchmal schaltet sich die Box auch bei loading neutrino aus.

Please Help!!

Ace

P.S.:Habe meine Box manuel upgedatet.

Beitrag von **Zahni** » Sonntag 13. April 2003, 15:23

Huch, die X-BOX als DVB-SetTopBox. Cool !

Abber falls das doch eine DBOX2 ist: Wie immer: Boolot ! (Stht im FAQ-Bereich).

-Zahni

Beitrag von **Ace** » Sonntag 13. April 2003, 15:30

Mein gott wo habe ich meine gedanken

Sorry, ich meinte die D-Box2.
Boolot?Habe nichts gefunden.Was soll das sein?

Ace

Beitrag von **Zahni** » Sonntag 13. April 2003, 15:50

Sorry, ich und meine Tippfehler.

Im FAQ-Bereich unter "BOOTLOG" .

-Zahni

Beitrag von **Ace** » Sonntag 13. April 2003, 16:22

bei mir zeigt der sowas:

i2c-CAM read error.
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory

Beitrag von **Zahni** » Sonntag 13. April 2003, 16:55

Bitte das Ganze Bootlog.

-Zahni

Beitrag von **Ace** » Sonntag 13. April 2003, 17:00

0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
insmod: init_module: avia: Input/output error
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
i2c-CAM read error.
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
Using /lib/modules/2.4.20/misc/avia_gt.o
insmod: unresolved symbol avia_set_pcr
Using /lib/modules/2.4.20/misc/dvb.o
insmod: unresolved symbol avia_wait
insmod: unresolved symbol avia_wr
insmod: unresolved symbol avia_command
insmod: unresolved symbol avia_rd
insmod: unresolved symbol avia_flush_pcr
insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation
Init AT76C651
Using /lib/modules/2.4.20/misc/at76c651.o
insmod: unresolved symbol register_frontend
insmod: unresolved symbol unregister_frontend
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
insmod: unresolved symbol avia_gt_dmx_queue_reset
insmod: unresolved symbol unregister_demux
insmod: unresolved symbol avia_gt_dmx_queue_irq_enable
insmod: unresolved symbol avia_gt_dmx_set_pcr_pid
insmod: unresolved symbol avia_gt_dmx_release_section_filter
insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext
insmod: unresolved symbol avia_gt_dmx_fake_queue_irq
insmod: unresolved symbol avia_gt_dmx_get_queue_irq
insmod: unresolved symbol avia_gt_dmx_set_filter_parameter_table
insmod: unresolved symbol register_demux
insmod: unresolved symbol avia_gt_dmx_set_pid_table
insmod: unresolved symbol avia_gt_dmx_force_discontinuity
insmod: unresolved symbol avia_gt_dmx_set_pid_control_table
insmod: unresolved symbol avia_gt_dmx_get_hw_sec_filt_avail
insmod: unresolved symbol avia_gt_dmx_get_queue_info
insmod: unresolved symbol avia_gt_dmx_set_section_filter
insmod: unresolved symbol avia_gt_get_info
insmod: unresolved symbol avia_gt_dmx_alloc_queue_video
insmod: unresolved symbol avia_gt_dmx_free_queue
insmod: unresolved symbol avia_gt_dmx_queue_irq_disable
insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio
insmod: unresolved symbol avia_gt_dmx_alloc_queue_message
insmod: unresolved symbol avia_gt_dmx_alloc_queue_user
insmod: unresolved symbol avia_gt_free_irq
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
insmod: unresolved symbol avia_gt_get_info
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
insmod: unresolved symbol avia_gt_gv_show
insmod: unresolved symbol avia_gt_gv_get_clut
insmod: unresolved symbol avia_gt_gv_set_input_size
insmod: unresolved symbol avia_gt_gv_set_pos
insmod: unresolved symbol avia_gt_gv_hide
insmod: unresolved symbol avia_gt_get_info
insmod: unresolved symbol avia_gt_gv_set_size
insmod: unresolved symbol avia_gt_gv_set_input_mode
insmod: unresolved symbol avia_gt_gv_set_clut
insmod: unresolved symbol avia_gt_gv_set_blevel
insmod: unresolved symbol avia_gt_gv_get_info
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
insmod: unresolved symbol avia_gt_pcm_play_buffer
insmod: unresolved symbol avia_gt_pcm_stop
insmod: unresolved symbol avia_gt_pcm_set_signed
insmod: unresolved symbol avia_gt_pcm_set_endian
insmod: unresolved symbol avia_gt_pcm_set_rate
insmod: unresolved symbol avia_standby
insmod: unresolved symbol avia_gt_pcm_set_width
insmod: unresolved symbol avia_gt_pcm_poll
insmod: unresolved symbol avia_get_sample_rate
insmod: unresolved symbol avia_gt_pcm_set_channels
insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation
insmod: unresolved symbol avia_gt_pcm_get_block_size
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
insmod: unresolved symbol avia_gt_ir_receive_pulse
insmod: unresolved symbol avia_gt_ir_receive_data
insmod: unresolved symbol avia_gt_ir_get_rx_buffer_write_position
insmod: unresolved symbol avia_gt_ir_send_buffer
insmod: unresolved symbol avia_gt_ir_queue_pulse
insmod: unresolved symbol avia_gt_ir_set_duty_cycle
insmod: unresolved symbol avia_gt_ir_set_frequency
insmod: unresolved symbol avia_gt_ir_get_rx_buffer_read_position
Using /lib/modules/2.4.20/misc/lcd.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.2 2003/03/02 23:28:32 alexW Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3

$Id: sectionsd.cpp,v 1.164 2003/03/03 13:38:33 obi Exp $
caching 504 hours
events are old 60min after their end time
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[camd] /dev/dvb/card0/ca0: No such file or directory
$Id: zapit.cpp,v 1.290.2.12 2003/03/03 11:18:41 alexw Exp $
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[frontend.cpp:CFrontend:62] /dev/dvb/card0/frontend0: No such file or directory
[zapit] unable to open frontend devices. bye.
[sectionsd] getUTC: open: No such file or directory
Controld $Id: controld.cpp,v 1.99 2003/03/04 16:33:16 alexw Exp $

[controld] Boxtype detected: (2)
set event: 00000009
[sectionsd] open dmx: No such file or directory
[nhttpd] Neutrino HTTP-Server starting..
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[sectionsd] open dmx: No such file or directory
[CBasicClient] connect failed.
[sectionsd] getUTC: open: No such file or directory
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.421 2003/03/03 22:19:15 mws Exp $

[sectionsd] open dmx: No such file or directory
i2c-CAM read error.
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
CXA2126 found
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
i2c-CAM read error.
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
i2c-CAM read error.
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
i2c-CAM read error.
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
i2c-CAM read error.
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
Unmounting 'ramfs' on '/tmp'
[sectionsd] getUTC: open: No such file or directory
umount: /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Ready to shutdown system...

Sending SIGTERM to all processes.[nhttpd] stop requested......
i2c-CAM read error.
System halted.

Beitrag von **Zahni** » Sonntag 13. April 2003, 17:06

Ist zwar wieder nicht komplett, aber in Deinem Image fehlen die Ucodes:

avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.

-Zahni

Beitrag von **doc** » Sonntag 13. April 2003, 17:10

Würde es auch mal versuchen komplett neu zu flashen!

Wimmelt ja nur so von Fehlermeldungen beim Starten.

Beitrag von **Ace** » Sonntag 13. April 2003, 17:12

Und wie, wenn ich fragen darf?

Ace

Beitrag von **Ace** » Sonntag 13. April 2003, 18:07

Ok, ich hab jetzt versucht mit dem BootManager zu flashen:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-c7.d2.d1.07.00.00-0e
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000

PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 21:12:06)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .

.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/D-BoXII/Neue-Version/flashimage.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
=>

Was jetzt?

Ace

Beitrag von **Ace** » Sonntag 13. April 2003, 18:44

Weis niemand rat?

Ace

Beitrag von **rasc** » Sonntag 13. April 2003, 19:22

Lies dir bitte das Readme vom dbox2bootmanager mal gruendlich durch.
Irgendwie versuchst Du irgendein obskures Image zu booten, das kann nicht gehen.

Am besten du flasht das Basis-Image von grundauf neu, und dann ein vernünftiges cfk.cramfs, sowie die ucodes hinterher...

Beitrag von **Ace** » Sonntag 13. April 2003, 20:33

Da steht:

Image IN DIE BOX flashen
------------------------

(Funktioniert sowohl für's Wiederherstellen der original BR-Soft, als auch zum Aufspielen
von Linux-Images von http://tuxbox.berlios.de/flash/).
!!!!!! Ihr müsst euch keine Sorgen über den Bootloader machen (also über die Dateigröße des Images),
DBox-Boot beachtet das automatisch. !!!!!!

0. Ihr MÜSST ein serielles Kabel anhängen (COM einschalten)

1. Die DBox muß im Debug-Mode sein!
2. RARP-Server ausschalten (empfohlen)
3. Einstellungen auf der ersten Seite sind sonst egal, weil das Programm sie automatisch vornimmt.
4. NICHT Start drücken

5. Auf der Utils-Seite auf "Image flashen" klicken, und danach den Anweisungen folgen.
6. Sobald ihr das gewünschte Image ausgewählt und alle Sicherheitsabfragen beantwortet habt,
startet die DBox.

7. Ab diesem Zeitpunkt sollte alles von selbst laufen, wenn das Flashen abgeschlossen ist,
kommt eine Meldung am Schirm.

9. Sofern Ihr eine original BR-Soft geflasht habt, die NICHT von EURER Box ist, müsst ihr wie im FAQ beschrieben
noch die Datei .did wiederherstellen (wenn ihr euer eigenes image geflasht habt, dann passt alles).

Zu.1.Ich hab in den debug-modus gestartet.

Zu.7.Da läuft NICHTS!!!
Bei mir steht nur:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-c7.d2.d1.07.00.00-0e
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26ec0, &_data 0x26ec0, &_edata 0x2a9bc
debug: &_end 0x35944, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>

Und mehr net!

Please Help!!

Ace

Beitrag von **SoLaLa** » Sonntag 13. April 2003, 22:24

wenn Du von 1. bis 6. alles fertig hast, dann tipp doch an dieser Stelle

debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>

mal "boot" in die serielle Konsole ein

Beitrag von **Ace** » Sonntag 13. April 2003, 23:12

Dann kommt das:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-c7.d2.d1.07.00.00-0e
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26ec0, &_data 0x26ec0, &_edata 0x2a9bc
debug: &_end 0x35944, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>

Ace

Beitrag von **Ace** » Dienstag 15. April 2003, 14:50

Hallo?Ich hab euch mein BootLog gegeben!Was braucht ihr noch?

Ace

Beitrag von **DieMade** » Dienstag 15. April 2003, 15:07

Netzwerkproblem. Was sagt der Bootmanager im Netzwerk-Log (grauer Kasten oben)?

Beitrag von **Ace** » Dienstag 15. April 2003, 21:22

Wie soll ich bitte eine verbindung aufbauen wenn ich NICHT MAL DIESE SCH*** IP HABE?

Ace

Beitrag von **SoLaLa** » Dienstag 15. April 2003, 21:57

nu mal nicht so grantig...
die Box hat garkeine IP... deshalb kannst Du die auch nicht haben

die Box bekommt die IP erst beim flashen bzw. beim Booten übers Netzwerk zugewiesen... vom PC

und das könnte man im Netzwerklog (dem grauen Kasten des Bootmanagers sehen), also bitte: poste das Netzwerklog

Beitrag von **Ace** » Dienstag 15. April 2003, 23:15

Danke das du es mir erklärst das ich das verstehe.
Wartet mal bissl.

Ace

Beitrag von **Ace** » Dienstag 15. April 2003, 23:18

Und nochmal sorry.

Ace

Beitrag von **Ace** » Dienstag 15. April 2003, 23:24

***Adapter Desc: Realtek RTL8139-Familie-PCI-Fast Ethernet-NIC (via IpHlpApi #0)
***MAC address: 00:E0:7D:B8:AC:84 Local IP: 192.168.1.128
***BootP server started... Port 67
***TFTP server started... Port 69

Und etzt?

Ace

Beitrag von **Ace** » Mittwoch 16. April 2003, 21:07

Hallo?Alle tot?Was muss ich etzt machen?

Ace

Beitrag von **SoLaLa** » Donnerstag 17. April 2003, 01:50

nungut,
Dein PC hat die IP 192.168.1.128
was hast denn jetzt im Bootmanager als IP für die Box eingetragen?
und hast da bei dem NetzwerkLOG jetzt auch das "boot" in die serielle Konsole getippt?