Nokia 2xI will nicht mehr ! (Starting Kernel)

Wie blitze ich ein Bild - Permanent Outgoing Incomes
McPower
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 30. März 2003, 11:22

Nokia 2xI will nicht mehr ! (Starting Kernel)

Beitrag von McPower »

Hallo,
meine Box macht nach der Schrift Starting Kernel nicht mehr weiter, hab sie schon so bekommen. Auch ein neues Image aufzuspielen klappt nicht. Hat jemand eine Idee, woran das liegen könnte, hier mal das LOG:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-63.17.1b.07.00.00-5c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 577057 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 576993 Bytes = 563 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
rasc
Senior Member
Beiträge: 5071
Registriert: Dienstag 18. September 2001, 00:00

Beitrag von rasc »

----
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
----


read the FAQ... (Hint: Press "2")
McPower
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 30. März 2003, 11:22

Beitrag von McPower »

wann muss ich 2 drücken?

am PC oder auf der fernbedienung?
McPower
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 30. März 2003, 11:22

Beitrag von McPower »

hier nochmal ein log, ohne alle server:

ne idee, was ich amchen könnte??


debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-63.17.1b.07.00.00-5c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 577057 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 576993 Bytes = 563 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Son Sep 22 10:35:10 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 251625000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30944k available (1008k kernel code, 356k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1c:98:61
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

hallöle,
bleibt sie an der Stelle stehen oder bootet die Kiste danach neu?
never change a running system
McPower
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 30. März 2003, 11:22

Beitrag von McPower »

hi,

die box bleibt stehen und das wars, bei jedem start, keine ausnahme..
McPower
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 30. März 2003, 11:22

Beitrag von McPower »

keine idee?
cmc
Einsteiger
Einsteiger
Beiträge: 235
Registriert: Montag 6. Januar 2003, 10:53

Beitrag von cmc »

Was für ein image hast du denn genommen ???
McPower
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 30. März 2003, 11:22

Beitrag von McPower »

das von AlexW hab auch schon andere versucht aber es scheitert immer an dieser stelle
MHC
GOD
Beiträge: 409
Registriert: Sonntag 22. Juli 2001, 00:00

Beitrag von MHC »

McPower hat geschrieben:das von AlexW hab auch schon andere versucht aber es scheitert immer an dieser stelle
mhh

Code: Alles auswählen

PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)
Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft #1 Son Sep 22 10:35:10 CEST 2002
komisches Image :roll:
der Kernel (vom cramfs) scheint ziemlich alt zu sein, aber ppcboot (war mal Baseimage)ziemlich neu
... kann es sein, das du auf ein 1.6.8 Base ein zu altes cdk.cramfs geflasht hast ???
ps. ... flashe ein aktuelles Image und poste nochmal ein log
McPower hat geschrieben:Auch ein neues Image aufzuspielen klappt nicht.
... diese Problem solltest du erst beheben :roll:
McPower
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 30. März 2003, 11:22

Beitrag von McPower »

Wie meinst du das denn? Ich habe das Image so geflasht, wie man es hier runterladen kann und auch noch 1.6 und 1.6.3 aber mit

Auch ein neues Image aufzuspielen klappt nicht.

meinte ich, das bei jedem Image die Box bei "starting Kernel" stehenbleibt.

Ich weiss nicht mehr weiter..

Bitte helft mir
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

ich tipp eher auf irgendwas mit dem avia oder dem RAM zum avia...
never change a running system
McPower
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 30. März 2003, 11:22

Beitrag von McPower »

und wie kann ich sowas reparieren?
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

also anfangen mal mit den 4 RAMs neben dem Avia, heiß/kalt ausprobieren und auch mal mechanisch checken (draufdrücken und schaun ob die Box bootet oder sich zumindest irgedneine Verhaltensänderung abzeichnet)
never change a running system
McPower
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Sonntag 30. März 2003, 11:22

Beitrag von McPower »

also heiß/kalt testen, weiss ich nicht, was du damit meinst, aber wenn ich draufdrücke, passiert nichts. hast du ne andere idee?