Phillips Box Sat erfolgreich(?) geflasht, Bild -> schwarz

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Force
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Samstag 29. März 2003, 14:16

Phillips Box Sat erfolgreich(?) geflasht, Bild -> schwarz

Beitrag von Force »

Hallo,

ich habs endlich geschafft, bzw. ein Kollege, eine Phillips Sat Box erfolgreich zu flashen. Nach dem einschalten läuft auf dem Display auch alles normal ab, Neutrino startet, bleibt dann aber bei "Waiting.." und dem Lautstärkebalken stehen.

Was mich jedoch am meisten schockt ist, dass trotz funktionierender Scart-Verbindung zum Fernseher, dieser absolut schwarz bleibt, muesste da nicht wenigstens der Bootbildschirm etc zu sehen sein?

Meine eigene Nokia Kabelbox bringt jedenfalls immer ein Bild, auch wenn keine Karte oder kein Antennenkabel dran ist.

Bitte sag mir einer, dass wir die Box nicht zerschossen haben :( :o

Bis später,

Force
Bild
thegoodguy
Erleuchteter
Erleuchteter
Beiträge: 465
Registriert: Mittwoch 14. August 2002, 20:45

Beitrag von thegoodguy »

Force
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Samstag 29. März 2003, 14:16

Beitrag von Force »

log siehe zwei beiträge weiter unten
Zuletzt geändert von Force am Samstag 29. März 2003, 14:47, insgesamt 1-mal geändert.
thegoodguy
Erleuchteter
Erleuchteter
Beiträge: 465
Registriert: Mittwoch 14. August 2002, 20:45

Beitrag von thegoodguy »

anykey druecken um flash auslesen
Der Bootmanager soll den Flashinhalt auslesen???
Du hast doch bereits den Inhalt vor dem Flashen gesichert (hoffentlich).

Mach mal den Bootmanager (bis auf die serielle Konsole) aus.
Force
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Samstag 29. März 2003, 14:16

Beitrag von Force »

sorry ich habe den flaschen log gepostet, dieser hier ist es
ungekürzt, da ich nicht weiss was wichtig ist und was nicht...


Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-32.dd.ff.07.00.00-9d
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU:   PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
       Watchdog enabled
Board: DBOX2, Phillips
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
LCD:   ready
FB:    loading - ready
In:    serial
Out:   serial
Err:   serial

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select (1-3), other keys to stop autoboot:  0 
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    635427 Bytes = 620 kB = 0 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Fre Feb 28 20:20:56 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247125000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
 AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2c:7d:02
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started:  BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caEmpty flash at 
0x00026420 ends at 0x000264ec
Empty flash at 0x0003f3b0 ends at 0x0003fff4
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0003fff4: 0xffff in
stead
Using /lib/modules/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter  registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
Oops: kernel access of bad area, sig: 11
NIP: C00B84A4 XER: 00000000 LR: C38CA094 SP: C1CBBDE0 REGS: c1cbbd30 TRAP: 0300 
   Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000024, DSISR: 0000013E
TASK = c1cba000[28] 'insmod' Last syscall: 128 
last math 00000000 last altivec 00000000
GPR00: C38CA094 C1CBBDE0 C1CBA000 C38CDA78 C1CBBE18 00000008 FFFFFFFF 001911A5 
GPR08: 00308800 C38CDAB6 00000011 C00B848C 0000000D 10064168 00000000 00000000 
GPR16: 00000000 00000000 00000000 00000000 00009032 01CBBF40 C1CBBEA8 1007C040 
GPR24: C1C07000 C01F6D40 C0130000 C38CDA78 C38D0000 00000008 00000000 00000000 
Call backtrace: 
01CBBF40 C38CA094 C38CA7B0 C38CD1DC C0010188 C00025DC 10017A34 
10018F18 10003C84 10003890 0FEF5370 00000000 
Segmentation fault
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 1
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 2).
CAM: attached to adapter 
i2c-CAM read error.
Using /lib/modules/2.4.20/misc/dmxdev.o
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20/misc/dvb_frontend.o
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
ENX-INITed -> 0
there MIGHT be no TS :(
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.2 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init TDA8044H
Using /lib/modules/2.4.20/misc/tda8044h.o
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 3).
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp 
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.4 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
Using /lib/modules/2.4.20/misc/lcd.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.2 2003/03/02 23:28:32 alexW Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2

$Id: sectionsd.cpp,v 1.164 2003/03/03 13:38:33 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.12 2003/03/03 11:18:41 alexw Exp $
/var/tuxbox/config/zapit/services.xml: No such file or directory
Controld  $Id: controld.cpp,v 1.99 2003/03/04 16:33:16 alexw Exp $

[camd] ca system id: 1702
[camd] card_country: GER
[camd] card_number: 8005158331
[camd] card_version: 0384
[controld] Boxtype detected: (3)
set event: 00000009
[camd] no card is in slot #2
[camd] a card is in slot #1
open: No such file or directory
open: No such file or directory
open: No such file or directory
open: No such file or directory
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.421 2003/03/03 22:19:15 mws Exp $

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
IP       : 192.168.0.202
Netmask  : 255.255.255.0
Broadcast: 192.168.0.255
Gateway  : 
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
thegoodguy
Erleuchteter
Erleuchteter
Beiträge: 465
Registriert: Mittwoch 14. August 2002, 20:45

Beitrag von thegoodguy »

Empty flash at 0x0003f3b0 ends at 0x0003fff4
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0003fff4: 0xffff in
stead
Sieht nicht gut aus (filesystem kaputt). Versuch mal das nochmal zu flashen.
Wenn flashen nicht hilft, muessen da wohl eher die Hardwareleute ran.
Force
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Samstag 29. März 2003, 14:16

Beitrag von Force »

puhh, nachdem mir angst und bange wurde hab ich neu geflasht und von empty flash ist nun nichts mehr zu sehen... wer hat noch eine weitere idee?

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-32.dd.ff.07.00.00-9d
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU:   PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
       Watchdog enabled
Board: DBOX2, Phillips
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
LCD:   ready
FB:    loading - ready
In:    serial
Out:   serial
Err:   serial

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select (1-3), other keys to stop autoboot:  0 
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    635427 Bytes = 620 kB = 0 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Fre Feb 28 20:20:56 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247125000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
 AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2c:7d:02
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started:  BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter  registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
Oops: kernel access of bad area, sig: 11
NIP: C00B84A4 XER: 00000000 LR: C38CA094 SP: C1D4DDE0 REGS: c1d4dd30 TRAP: 0300 
   Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000024, DSISR: 0000013E
TASK = c1d4c000[28] 'insmod' Last syscall: 128 
last math 00000000 last altivec 00000000
GPR00: C38CA094 C1D4DDE0 C1D4C000 C38CDA78 C1D4DE18 00000008 FFFFFFFF 001911A5 
GPR08: 00308800 C38CDAB6 00000011 C00B848C 0000000D 10064168 00000000 00000000 
GPR16: 00000000 00000000 00000000 00000000 00009032 01D4DF40 C1D4DEA8 1007C040 
GPR24: C1C0A000 C01F6D40 C0130000 C38CDA78 C38D0000 00000008 00000000 00000000 
Call backtrace: 
01D4DF40 C38CA094 C38CA7B0 C38CD1DC C0010188 C00025DC 10017A34 
10018F18 10003C84 10003890 0FEF5370 00000000 
Segmentation fault
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/fp.o
Using /lib/modules/2.4.20/misc/lcd.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 1
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
[LCDFONT] initializing core...Using /lib/modules/2.4.20/misc/cam.o

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)der moment 
ist gekommen...

[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Bold)
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 2).
write 1 event's ...
write 1 event's ...
CAM: attached to adapter 
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
ENX-INITed -> 0
there MIGHT be no TS :(
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.2 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init TDA8044H
Using /lib/modules/2.4.20/misc/tda8044h.o
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 3).
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp 
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.4 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
cdkVcInfo $Id: cdkVcInfo.c,v 1.2 2003/03/02 23:28:32 alexW Exp $

$Id: sectionsd.cpp,v 1.164 2003/03/03 13:38:33 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.12 2003/03/03 11:18:41 alexw Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conffor reading.

/var/tuxbox/config/zapit/services.xml: No such file or directory
Controld  $Id: controld.cpp,v 1.99 2003/03/04 16:33:16 alexw Exp $

[ConfigFile] Unable to open file /var/tuxbox/config/controld.conffor reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (3)
set event: 00000009
open: No such file or directory
open: No such file or directory
open: No such file or directory
open: No such file or directory
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.421 2003/03/03 22:19:15 mws Exp $

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
IP       : 192.168.0.202
Netmask  : 255.255.255.0
Broadcast: 192.168.0.255
Gateway  : 
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[sectionsd] getUTC: read: Connection timed out
Bild
thegoodguy
Erleuchteter
Erleuchteter
Beiträge: 465
Registriert: Mittwoch 14. August 2002, 20:45

Beitrag von thegoodguy »

Also das Flash scheint ja jetzt okay zu sein. Aber jetzt musst du dem Kernel Oops auf den Zahn fuehlen. Der ist wohl nicht ganz unbekannt:
http://tuxbox.berlios.de/forum/viewtopi ... ernel+area
http://tuxbox.berlios.de/forum/viewtopi ... rea+insmod
Also Suchfunktion benutzen, den dort gegebenen Hinweisen folgen und/oder versuchen von den Leuten was rauszubekommen, die das Problem schon hatten ...
Und am Ende bitte die Ursache posten, damit die naechsten davon profitieren koennen.