Habe Suse 8.1. Qbops bringt beim starten folgendes:
lise:/ # rcrec_dbox2 start
Starting Starting qBOPS - Q - BOx Programing System
lise:/ # PING 10.0.0.20 (10.0.0.20) from 10.0.0.100 : 56(84) bytes of data.
d-box is on
Initializing with Path:
/usr/local/qbopsd
10.0.0.20
8716331
PREMIERE 3
Signal angekommen
15:34:12
Zapping Constructor
Connected to dbox2
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
ASSERT: "i <= nodes" in /usr/lib/qt3/include/qvaluelist.h (360)
Ist das OK so, oder muss ich Änderungen vornehmen ?
Aufnehmen klappt - zumindest manchmal
Mit der Weboberfläche von qbops Sendungen programmieren resultiert in einer 0 k grossen Datei. Über das Webinterface der Dbox klappts meist, aber au nicht immer.
Wollte aber gerne das Webinterface von Qbops benutzen. Was kann man da konfigurieren ?
Grüsse
Chris