make all fehler

[Optimum Power]

@testforscher > bis jetzt ist es noch nicht durchgelaufen !!
Habe gestern Head ausgescheckt.
Bin jetzt nach dem Enigma-Po-Problem bis hier hin gekommen .
Nun ist wieder erst einmal Schluß !
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
./configure: line 4163: syntax error near unexpected token `<<<'
./configure: line 4163: `<<<<<<< acinclude.m4'
make: *** [/home/Optimum/tuxbox-cvs/apps/tuxbox/lcars/config.status] Error 2
Hänge jetzt im Lcars fest!

[testforscher]

wie hast du das Enigma-Po-Problem gelöst , hab ich da was verpasst ?
hei Haed hänge ich bei po
und bei Rel. siehe hier

Code: Alles auswählen

make -C /home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma all install
make[1]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma'
make  all-recursive
make[2]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma'
Making all in include
make[3]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e'
Making all in lib
make[4]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib'
Making all in base
make[5]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib/base'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib/base'
Making all in codecs
make[5]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib/codecs'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib/codecs'
Making all in driver
make[5]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib/driver'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib/driver'
Making all in dvb
make[5]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib/dvb'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib/dvb'
Making all in gdi
make[5]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib/gdi'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib/gdi'
Making all in gui
make[5]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib/gui'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib/gui'
Making all in socket
make[5]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib/socket'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib/socket'
Making all in system
make[5]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib/system'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib/system'
make[5]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e/lib'
make[5]: Nothing to be done for `all-am'.
make[5]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib'
make[4]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
/lib'
make[4]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/includ
e'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
'
make[3]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/include
'
Making all in lib
make[3]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/lib'
Making all in base
make[4]: Entering directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/lib/ba
se'
if powerpc-tuxbox-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../include  -I/home/J
an_B/tuxbox_20030302_release/driver/include -I/home/Jan_B/tuxbox_20030302_release/driver/i
nclude -I/home/Jan_B/tuxbox_20030302_release/dbox2/cdkroot/include -I/home/Jan_B/tuxbox_20
030302_release/dbox2/cdkroot/include/freetype2 -I/home/Jan_B/tuxbox_20030302_release/dbox2
/cdkroot/include/tuxbox   -I/home/Jan_B/tuxbox_20030302_release/dbox2/cdkroot/lib/sigc++-1
.2/include -I/home/Jan_B/tuxbox_20030302_release/dbox2/cdkroot/include/sigc++-1.2   -I/hom
e/Jan_B/tuxbox_20030302_release/dbox2/cdkroot/include/tuxbox/xmltree   -fno-exceptions -fn
o-rtti -Werror  -Wall -Os -mcpu=823 -msoft-float -mmultiple -mstring -pipe -MT ebase.o -MD
 -MP -MF ".deps/ebase.Tpo" \
  -c -o ebase.o `test -f 'ebase.cpp' || echo './'`ebase.cpp; \
then mv ".deps/ebase.Tpo" ".deps/ebase.Po"; \
else rm -f ".deps/ebase.Tpo"; exit 1; \
fi
make[4]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/lib/bas
e'
make[3]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma/lib'
make[2]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma'
make[1]: Leaving directory `/home/Jan_B/tuxbox_20030302_release/apps/tuxbox/enigma'
...
make[4]: *** [ebase.o] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all] Error 2
make: *** [.enigma] Error 2

??????????????????????????

[thegoodguy]

@Optimum Power:

Code: Alles auswählen

./configure: line 4163: syntax error near unexpected token `<<<'
./configure: line 4163: `<<<<<<< acinclude.m4'

Sieht so aus als haettest du acinclude.m4 per Hand geaendert und dann spaeter mal ein cvs update gemacht. Da konnte er die Aenderungen nicht reinmergen.
Also apps/acinclude.m4 loeschen und neu auschecken.

@testforscher:
Die interessantesten Zeilen und zwar die mit der eigentlichen Fehlermeldung fehlen.

[testforscher]

make all log

Code: Alles auswählen

In file included from ../../include/lib/base/ebase.h:12,
                 from ebase.cpp:1:
../../include/libsig_comp.h:4:27: sigc++/sigc++.h: No such file or directory
../../include/libsig_comp.h:5:25: sigc++/bind.h: No such file or directory
In file included from ebase.cpp:1:
../../include/lib/base/ebase.h:161: 'Signal1' is used as a type, but is not 
   defined as a type.
../../include/lib/base/ebase.h: In member function `void 
   eSocketNotifier::activate(int)':
../../include/lib/base/ebase.h:162: `activated' undeclared (first use this 
   function)
../../include/lib/base/ebase.h:162: (Each undeclared identifier is reported 
   only once for each function it appears in.)
../../include/lib/base/ebase.h: At global scope:
../../include/lib/base/ebase.h:196: 'Signal0' is used as a type, but is not 
   defined as a type.
ebase.cpp: In member function `void eTimer::activate()':
ebase.cpp:93: `timeout' undeclared (first use this function)
make[4]: *** [ebase.o] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all] Error 2
make: *** [.enigma] Error 2

wo ist der Fehler zu suchen ??????

[testforscher]

kann mir keiner helfen??

:cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:

[thegoodguy]

make all log

Code: Alles auswählen

In file included from ../../include/lib/base/ebase.h:12,
                 from ebase.cpp:1:
../../include/libsig_comp.h:4:27: sigc++/sigc++.h: No such file or directory
../../include/libsig_comp.h:5:25: sigc++/bind.h: No such file or directory
wo ist der Fehler zu suchen ??????[/quote]

make .libsigc

[testforscher]

$ make .libsigc
make: `.libsigc' is up to date.

aber trotzdem will es nicht

[thegoodguy]

Dann probier mal

Code: Alles auswählen

rm .libsigc
make .libsigc

Gibt es im Verzeichnis

Code: Alles auswählen

/home/Jan_B/tuxbox_20030302_release/dbox2/cdkroot/include/sigc++-1.2

die Dateien sigc++/sigc++.h und sigc++/bind.h?