nach dem update nix mehr da

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

nach dem update nix mehr da

Beitrag von Inqvisitor »

:cry:
Folgendes ,wie mein kolege hier in forum habe ich das cdk.cramfs auf den neuesten stand bringen wollen und nach dem neustart booted die dox nur bis zum zeitpunkt wo das alexW info kommen müste,dh es bleibt dunkel.Seit dem bekomme ich keine verbindung wieder lan noch com und es ist nicht ein 0190 warner oder sonstiges.

habe eine nokia avia500 2xintel alexW1.6 und viele falten
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

sorry

Beitrag von Inqvisitor »

mit com bekomme ich folgendes...
debug: DDF: Calibrating delay loop...
debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-b8.dc.1f.07.00.00-3c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202996
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:06:03)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
:o Heeeee?
es scheint alles onordnung so weit ich das beurteilen kann doch es bleibt dunkel ,auch in erweitertem debug modus keine lan verbindung
hilfe mich bitte! (betel ,betel...)
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
tipp mal an der Stelle die "2" auf der Tastatur damit das LOG weitergeschrieben wird, und dann postest hier bitte nochmal das komplette :wink:
never change a running system
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

Beitrag von Inqvisitor »

wow !
das alles hat sie augespukt ich kann nich garantieren das ich den richtigen augenblick erwicht habe, aber muss wohl.

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-b8.dc.1f.07.00.00-3c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202996
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:06:03)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Die Dez 31 18:36:38 CET 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30816k available (1120k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1f:55:25
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUpdate altes Ba
seimage...
[: /var/etc/.v1.6.3: unknown operand
rm: cannot remove `/var/tuxbox/start_neutrino': No such file or directory
rm: cannot remove `/var/tuxbox/start_enigma': No such file or directory
rm: cannot remove `/var/tuxbox/start_lcars': No such file or directory
ln: /var/tuxbox/start_neutrino: No space left on device
ln: /var/tuxbox/start_enigma: No space left on device
ln: /var/tuxbox/start_lcars: No space left on device
touch: /var/etc/.v1.6.6: No space left on device
ln: /var/tmp: No space left on device
touch: /var/etc/.v1.6.7: No space left on device
Using /lib/modules/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.22 2002/09/13 22:53:55 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.6 2002/09/19 21:09:20 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.134 2002/09/21 00:00:08 Jolt Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.18 2002/09/25 18:50:52 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init VES1893
Using /lib/modules/2.4.20/misc/ves1893.o
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
avia_gt_core: masking unhandled irq reg 0 bit 6
VES1893: attaching VES1893 at 0x10 to adapter
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.130 2002/09/18 15:57:24 Jolt Exp $
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.11 2002/09/25 18:50:52 Jolt Exp $
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
Using /lib/modules/2.4.20/misc/lcd.o
/etc/init.d/rcS: /var/tuxbox/start_neutrino: No such file or directory

Please press Enter to activate this console. lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1

ist etwas zu komplitukisch für mich :roll:
cmc
Einsteiger
Einsteiger
Beiträge: 235
Registriert: Montag 6. Januar 2003, 10:53

Beitrag von cmc »

Hi ich würde das baseImage noch mal neu flashen !!!
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

Beitrag von Inqvisitor »

wenn sonst nix hilft....
komisch es ist immer der gleiche tip. :-?
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

Beitrag von Inqvisitor »

hallo leute
ich bin`s wieder ,habe mich grade mit flashen beschäftigt..... gibt es methoden um zu fläschen ohne lan? ich krieg zum verrecken keine lan verbindung zur box ,bei dietmar-h.net hab ich auch nix gefunden.
bis bald ,eurer :cry:
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Ohne Lan kein flashen.
There are 10 types of people in the world: those who know binary and those who don't
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

Beitrag von Inqvisitor »

:lol: es ist wie bei einem alten mann... ich glaube es tut sich was!

ups jetzt steht im lcd kein system ,aber das haben hier viele ...
also auf in den kampf, kameraden!
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

Beitrag von Inqvisitor »

Haallo zusammen
neuer tag neues problem...
seit dem "kein system" habe ich zwar lan und com verbindung aber nur mit dem boot-manager ,kein ftp und flashen geht auch nicht ,es kommt

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-b8.dc.1f.07.00.00-3c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>

jetzt kann ich "boot net" eingeben aber es ist auch eine saKgasse
mit windows anpingen geht auch aber das war auch alles

meine frage ...was ist flashsuperblock? doch nicht die jamper an dem flash, das habe ich auch probiert
weiss jemand rat?
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

hmmm,
das kann doch nicht so schwer sein:
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
an der Stelle (schon ganz am anfang bei Start/reset der box) sollst Du doch die Pfeilnachobentaste gedrückt halten.
dann bleibt die box am promt dbox2:root> stehen
und dann tippelst Du "boot" oder "boot net" ein und bestätigst mit der <enter>-taste
und dann postest Du hier das log wenn irgendwas nicht klappt
never change a running system
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

Beitrag von Inqvisitor »

hey solala
hier wahr ich schon auch nur wuste nicht was ich tippen soll ,image auslesen geht nicht, das habe ich ausprobiert und beschreiben auch nicht...also


debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-b8.dc.1f.07.00.00-3c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.10, My IP 192.168.0.27
debug: Sending TFTP-request for file C/Dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1f-55-25
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.27
Filename 'C/Dbox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1FD2864 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.27
Filename 'C/Dbox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.27
Filename 'C/Dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######T #####T ################################T #########T ##########
###########################################T #######T ###T ##
done
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/Dbox2/cdkr
oot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/Dbox2
/cdkroot/
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:1f:55:25
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.10, my address is 192.168.0.27
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.10
Looking up port of RPC 100005/2 on 192.168.0.10
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call

dbox2miniroot zum Flash auslesen v1.0
linux@dbox2 Project http://dbox2.elxsi.de
Wilkommen auf ihrer dbox2
druecken sie bitte einmal Enter
und danach geben sie ein
cat /dev/mtd/5 >/flash.img
das dauert ca 2 bis 5 minuten
dann kommt die Raute wieder
dann befindet sich in c: dbox2 cdkroot
die Datei flash.img , die ganz genau 8257536 Bytes
gross sein solte !
das ist dann ihr backup Flashimage das sie gut aufheben sollten
danach koennen sie die dbox2 einfach ausmachen

Please press Enter to activate this console.


BusyBox v0.60.2 (2002.02.26-14:29+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

#


ach übrigens, wenn ich flaschen will kommt...


Retry count exceeded; starting again
BOOTP broadcast 832
TFTP from server 192.168.0.10; our IP address is 192.168.0.27
Filename '/C/Dbox2/Alex/alexW2xBaseimageV1.6.3.img'.
Load address: 0x120000
Loading: T********** T**********************+ T******* T************ T***** T* T************** T******* T ***********************
Retry count exceeded; starting again
BOOTP broadcast 833
TFTP from server 192.168.0.10; our IP address is 192.168.0.27

wie du siehst es ist die halbe nacht durchgelaufen ...in der hoffnung.
[/i][/b]
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

äääähm, ich seh gerade... hast Du denn da eben auch cat /dev/mtd/5... usw mal eingetippelt?
never change a running system
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

Beitrag von Inqvisitor »

:oops:
nöööööööö, schon mall, aber jetzt nur enter
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

Beitrag von Inqvisitor »

zum booten benutzte ich hier den ppdboot von dem miniroot es ist der eizige wo ich lan verbindung aufbauen kann und in dem bootmamager d box ping auf ok steht

west jemand wie ich das flash beschreiben kann? und was ist mit dem flashsuperblock???
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Das Image auslesen würde funktionieren wenn Du Dich ans Readme gehalten hättest.
Generell scheint Dein Netzwerk nicht das beste zu sein, aber das flashen über die alternative Methode sollte trotzdem funktionieren.
(Die siehts nicht ganz so eng mit dem timeouts.)
Pinging Dbox failed ist übrigens sowohl beim Flash auslesen, als auch beim flashen normal.
Inqvisitor
Neugieriger
Neugieriger
Beiträge: 17
Registriert: Mittwoch 26. Februar 2003, 23:30

Beitrag von Inqvisitor »

:D es hatt geklappt

ich weß nicht warum und wenn jemand das gleiche problem hette wüste ich nicht wie man helfen kann, denn aus lauter verzweiflung bin ich völlig unortodox mit andrerem rechner :win2000, lanswitsh, autosance und sonst die gleichen daten und es funktioniert!
wie in der faq konnte ich nich gehen, weil es nich tat ... bin villeicht doof aber nich blööd, was ich hier gepostet habe ist nur ein kleiner ausschnitt und sachen von denen ich mir am meisten was versprochen habe.

nur leider die meisten haben keinen bock zu helfen, oder es kommen nur sprüche rüber, wileich nicht bei mir, aber habe schon einiges gelesen.

bis die tage ... euer :D