moin :D
habe mal cdk-root auf meinem pc rüber kopiert und habe über den boot manager mal gebootet und neutrino ausgewält, leider bleibt die box bei booting stehen, hier die ausgabe im com-terminal:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-3e.72.01.08.00.00-87
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.2, My IP 192.168.0.5
debug: Sending TFTP-request for file E/yadd_mein/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 219526
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Feb 22 2003 - 04:30:54)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2c-f1-15
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.5
Filename 'E/yadd_mein/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1FD2AD8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.5
Filename 'E/yadd_mein/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #######
done
FB logo at: 0x0 (0x1FD2AD8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.5
Filename 'E/yadd_mein/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
########################################################
done
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647356 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (
tuxbox@xbox.localdomain.local) (gcc version 3.2) #1 Sat Fe
b 22 04:33:35 UTC 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.2:E/yadd_m
ein/cdkroot/ ip=192.168.0.5:192.168.0.2:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 66 busfreq = 66
WARNING: NEW intfreq = 66000000 busfreq = 66000000
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30788k available (1136k kernel code, 376k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2c:f1:15
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.5, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.5, domain=, nis-domain=(none),
bootserver=192.168.0.2, rootserver=192.168.0.2, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.2
Looking up port of RPC 100005/1 on 192.168.0.2
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.4 (2003.02.21-22:08+0000) multi-call/share/empty: I
nput/output error
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: UNPROTECTED PRIVATE KEY FILE! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Permissions 0777 for '/etc/ssh/ssh_host_rsa_key' are too open.
It is recommended that your private key files are NOT accessible by others.
This private key will be ignored.
bad permissions: ignore key: /etc/ssh/ssh_host_rsa_key
Could not load host key: /etc/ssh/ssh_host_rsa_key
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: UNPROTECTED PRIVATE KEY FILE! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Permissions 0777 for '/etc/ssh/ssh_host_dsa_key' are too open.
It is recommended that your private key files are NOT accessible by others.
This private key will be ignored.
bad permissions: ignore key: /etc/ssh/ssh_host_dsa_key
Could not load host key: /etc/ssh/ssh_host_dsa_key
Disabling protocol version 2. Could not load host key
sshd: no hostkeys available -- exiting.
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
mID: 02
feID: 00
fpID: 52
enxID: 03
gtxID: ffffffff
hwREV: 01
fpREV: 30
DEMOD: TDA8044H
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 1).
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
mice: PS/2 mouse device common for all mice
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1 2002/11/17 01:59:13 obi Exp $
write 1 event's ...
write 1 event's ...
avia_gt_dmx: Successfully loaded ucode VB1.7
ENX-INITed -> 0
there MIGHT be no TS :(
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
dvb.c: init_dvb
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.2.1 2003/02/20 10:11:49 thegoodguy Exp
$
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
avia_oss: $Id: avia_gt_oss.c,v 1.12 2002/10/03 13:32:36 alexw Exp $
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_napi: hardware section filtering disabled.
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
dvb_net: $Id: dvb_net.c,v 1.6 2002/08/12 18:24:05 obi Exp $
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
Please press Enter to activate this console. [LCD-FONT] initializing core...
[LCD-FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCD-FONT] Intializing font cache...
[LCD-FONT] FTC_Face_Requester (Micron/Bold)
$Id: sectionsd.cpp,v 1.139.2.2 2003/02/17 19:33:32 thegoodguy Exp $
caching 504 hours
events are old 60min after their end time
[camd] Unknown 1.CMD-Class 03
[camd] ca system id: 1762
$Id: zapit.cpp,v 1.266.2.2 2002/10/28 22:57:18 thegoodguy Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
[getservices.cpp] going to parse satellite Astra 19.2E
[getservices.cpp] going to parse satellite Eutelsat 13.0E
[camd] no card is in slot #2
[camd] a card is in slot #1
[zapit] LoadServices: success
[zapit] reading Bouquets .......................................................
.......................
[zapit] Found 78 bouquets.
[zapit] channels have been loaded succesfully
Network LCD-Driver $Id: lcdd.cpp,v 1.57 2002/10/17 10:16:35 thegoodguy Exp $
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[LCD-FONT] initializing core...
[LCD-FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCD-FONT] Intializing font cache...
[LCD-FONT] FTC_Face_Requester (Micron/Regular)
Controld $Id: controld.cpp,v 1.76.2.1 2002/10/24 20:34:32 thegoodguy Exp $
[controld] Boxtype detected: (02, 2, 3, Philips)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.344 2002/10/16 16:25:24 dirch Exp $
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
/var/tuxbox/config/neutrino.conf: No such file or directory
/var/tuxbox/config/scan.conf: No such file or directory
[neutrino] error while loading scan-settings, using defaults!
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
