Mit folgender Fehlermeldung bleibt meine Sagem 1x im Bootmanager hängen :
mdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.3 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-c0.52.4b.08.00.00-e5
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052
will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 21:12:06)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.LCD: ready
FB: can't find logo in flash - try network
BOOTP broadcast 1
ARP broadcast 1
TFTP from server 192.168.5.6; our IP address is 192.168.5.7
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########
Bytes transferred = 43045 (a825 hex)
loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
cramfs: wrong magic
### FS LOAD ERROR<ffffffff> for vmlinuz!
=>
Die Box zeigt : loading Kernel
Der Fernseher zeigt : DBox II Boot-Manager
is working with your flash...
habe uber die Suchfunktion bei euch nichts gefunden. Weiß jemand Rat
Danke H. R.
