--------------------
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.111
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-31-4f-5e
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.111
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
Abort
FB logo not found
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/dbox2/test/13.img
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.111
Filename '/C/dbox2/test/13.img'.
Load address: 0x120000
Loading: ####gekürzt##########################
############################################################################
dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors
dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 63 ....erase failed: aa00aa
Erased 63 sectors
dbox2-ppcboot>
----------------------------------------------------
was mache ich bloß falsch?!
mfg
