Philips Image Flashing Problem Bitte Helfen

Wie blitze ich ein Bild - Permanent Outgoing Incomes
ZioPeppe
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Samstag 21. Dezember 2002, 22:29

Philips Image Flashing Problem Bitte Helfen

Beitrag von ZioPeppe »

:D :D :D :D Erster ein Schönen guten Rutsch
:P :P :P :P

Hallo ::: bei image flashing geht nicht weiter nach debug modo...debug:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID xxxxxxxxxxxxxxxxxxx
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.5, My IP 192.168.1.27
debug: Sending TFTP-request for file C/DBOX2/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2d-22-28
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename 'C/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename 'C/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename 'C/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again



------------------------------------------------------------------------
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID xxxxxxxxxxxxxx
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>


-----------------------------------------------------------------------------------

DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID xxxxxxxxxxxxxxxxxx
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.5, My IP 192.168.1.27
debug: Sending TFTP-request for file D/dbox/ppcboot.txt
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2d-22-28
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial

Any key druecken um das Flashing abzubrechen.. : 0
LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 3
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename '/tftpboot/13.img'.
Load address: 0x100000





Ins log:::

TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\13.img"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\13.img"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)


Danke für das Helfen und noch mal eine guten Rutsch


Gruß ZioPeppe
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Sieht nach nem Problem mit der seriellen Schnittstelle aus (evtl. Kabel locker oder so)
Probier mal die Methode ohne Nullmodem, die sollte tun.
Pong
Interessierter
Interessierter
Beiträge: 48
Registriert: Dienstag 17. Dezember 2002, 21:27

Beitrag von Pong »

Dietmar hat geschrieben:Sieht nach nem Problem mit der seriellen Schnittstelle aus (evtl. Kabel locker oder so)
Probier mal die Methode ohne Nullmodem, die sollte tun.
Habe momentan kein NullmodemKabel zur Verfügung.
Wie kann ich dein ein neues image flashen ohne Nullmodemkabel?
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Pong
Interessierter
Interessierter
Beiträge: 48
Registriert: Dienstag 17. Dezember 2002, 21:27

Beitrag von Pong »

Danke für die prompte Antwort! :wink:
ZioPeppe
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Samstag 21. Dezember 2002, 22:29

Beitrag von ZioPeppe »

:D :D Ist jezt wider alles ok.... das war nur seriall problem.....
viele danke für das helfen,,,



Gruss ZioPeppe :P :P :P :P