Fehler beim flashen mit Boot-Manager

Wie blitze ich ein Bild - Permanent Outgoing Incomes
HeinoRau
Beiträge: 2
Registriert: Samstag 28. Dezember 2002, 22:27

Fehler beim flashen mit Boot-Manager

Beitrag von HeinoRau »

HAllo,
Ich habe folgendes Problem. ich möchte mein d-box mit hilfe des boot managers flashen. der Flash startet auch soweit, aber nach ca 15 sec steht im Terminalfenster

Wdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID XXXXXXXXXXXXXXX
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.3, My IP 192.168.0.25
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-11-77-97
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.3; our IP address is 192.168.0.25
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.3; our IP address is 192.168.0.25
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /E/alexW2xBaseimageV1.6.3.img
BOOTP broadcast 1
TFTP from server 192.168.0.3; our IP address is 192.168.0.25
Filename '/E/alexW2xBaseimageV1.6.3.img'.
Load address: 0x120000
Loading: #######################################################################
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
######################
done

dbox2-ppcboot>



in der DBOX steht nach wie vor Neutrino


im Statusfenster des Bootmanagers steht:


PPCBoot gestoppt, lade Flash-Image


aber nix passiert (30min lang)

Weiß einer Rat???

M.f.G

Heino
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

tip mal "done" manuell ein. manchmal verpennt der bootmanager diese meldung.
There are 10 types of people in the world: those who know binary and those who don't
HeinoRau
Beiträge: 2
Registriert: Samstag 28. Dezember 2002, 22:27

Beitrag von HeinoRau »

!!!!!!!!! DANKE !!!!!!!!!!!

Vielen vielen Dank, hat mich 6 Stunden meines Lebens gekostet, aber jetzt läuft es.


....hmmmmm, muss wohl noch viel lernen


MfG

Heino
MasterN2K
Interessierter
Interessierter
Beiträge: 41
Registriert: Donnerstag 26. Dezember 2002, 20:22

Beitrag von MasterN2K »

ich hab eigentlcih fast das selbe problem hier mal von mir die ausgaben vom com terminal
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-29.a0.09.08.00.00-98
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.2, My IP 192.168.0.1
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3c-d4-27
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.1
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.1
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/image/13.img
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.1
Filename '/C/image/13.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
................................................................................
........................................Timeout
Erased 63 sectors

dbox2-ppcboot>
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Nein, Du hast ein ganz anderes Problem.
There are 10 types of people in the world: those who know binary and those who don't
MasterN2K
Interessierter
Interessierter
Beiträge: 41
Registriert: Donnerstag 26. Dezember 2002, 20:22

Beitrag von MasterN2K »

ok dann hab ich halt ein anderes problem aber es muss doch jemand helfen können