bootprobs die 3

Wie blitze ich ein Bild - Permanent Outgoing Incomes
weidex
Beiträge: 2
Registriert: Samstag 14. Dezember 2002, 01:42

bootprobs die 3

Beitrag von weidex »

TFTP> Non-BootP TFTP-transfer requested "C\dbox2\yadd\tftpboot\kernel-flash"


debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-f9.9a.bc.07.00.00-2a
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 169.254.248.90, My IP 169.254.248.89
debug: Sending TFTP-request for file C/dbox2/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 200228
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Sep 15 2002 - 22:09:05)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3b-56-8a
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 169.254.248.90; our IP address is 169.254.248.89
Filename 'C/dbox2/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1FD2AD8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 169.254.248.90; our IP address is 169.254.248.89
Filename 'C/dbox2/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
done
FB logo at: 0x0 (0x1FD2AD8 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 169.254.248.90; our IP address is 169.254.248.89
Filename 'C/dbox2/yadd/tftpboot/kernel-flash'.
Load address: 0x100000
Loading: *
Abort

dbox2-ppcboot> tftpboot
TFTP from server 169.254.248.90; our IP address is 169.254.248.89
No file name; using '59F8FEA9.img'.
No load address; using 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
jetzt kommt der scheiss
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

Herr, wirf mir mal n paar Moderatorrechte runter 8)

hallo Weidex,
kannst du uns auch erklären was die wilde posterei bedeuten soll?
-einmal posten reicht
-nicht nur das LOG ist interessant, sondern auch was Du da gerade machen möchtest

geh mal hin und lösch erstmal die beiden anderen Postings
never change a running system
weidex
Beiträge: 2
Registriert: Samstag 14. Dezember 2002, 01:42

Beitrag von weidex »

also ich habe versucht mit dem bootmaneger ein neues image zu flashen
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

hi,
Danke erstmal, daß Du die Übersichtlichkeit des Forums ein wenig wiederhergestellt hast :D

Du möchtest jetzt ein Image flashen, ok, der Bootmanager (zieh Dir am besten die neueste Version des Bootmanagers) hat dazu auf der <Utilities>-seite einen Button <image flashen>.
Wenn Du auf den draufklickst, dann wird auch von ganz alleine das RICHTIGE ppcboot zum flashen aktiviert.
und an dieser Stelle:
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
drückst Du bitte KEINE Taste, sondern läßt das einfach nur laufen, dann geht das auch. Und so ganz nebenbei könntest Du Dein Netzwerk noch in Ordnung bringen (feste private IPadresse 192.168.x.y für die Netzwerkkarte, Subnetz 255.255.255.0)
never change a running system