Ich hab da ein Problem mit der Dbox2 Nokia.
Die Box versucht zu booten bis im Display "neutrino" erscheint, dann bleibt sie hängen. Habe schon versucht ein neues Image aufzuspielen, aber da gehts auch blos nicht weiter.
Im COM-Terminal steht folgendes:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-92.9b.3c.07.00.00-05
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0196
will verify ELF image, start= 0x800000, size= 202876
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Mar 2 2002 - 20:44:32)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-42-f4-9d
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x86987 (0x1E00 bytes)
FB logo at: 0x80833 (0x612C bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x807D7 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 526230 Bytes = 513 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Dann erscheint: PPCBoot gestoppt, lade Flash-Image
und das wars dann.
Ich hoffe jemand kann mir helfen!!
Gruß Falk
