Diskussion:Yocto:ImageBuild:Stlinux

Funktionert das auch wirklich? -- Dbt (Diskussion) 23:52, 11. Apr. 2015 (CEST) -- Dbt (Diskussion) 23:52, 11. Apr. 2015 (CEST)

Das haut so nicht ganz hin, jedenfalls hab ich bisher noch nie mit Yocto irgendwas bauen können. Über die ersten Ausgaben geht's nie hinaus.

dbt@mach1:~/devel/yocto/yocto-poky-stl/build-stl> bitbake meta-toolchain NOTE: Started PRServer with DBfile: /home/dbt/devel/yocto/yocto-poky-stl/build-stl/cache/prserv.sqlite3, IP: 127.0.0.1, PORT: 42980, PID: 31132 WARNING: Host distribution "openSUSE-project-13.2" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution. ERROR: OE-core's config sanity checker detected a potential misconfiguration.

   Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
   Following is the list of potential problems / advisories:

   Please set a valid MACHINE in your local.conf or environment

Summary: There was 1 WARNING message shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code.