Hardware:Coolstream
Inhaltsverzeichnis
- 1 Allgemeines
- 2 Varianten
- 3 NeutrinoHD GUI
- 4 Fernbedienung
- 5 Anschlüsse
- 6 Innenleben
Allgemeines
Varianten
Die Coolstream HD1 gibt es zur Zeit nur in einer SAT-Varianten. Die Kabelversion soll jedoch in den nächsten Tagen verfügbar sein.
HD1 S
HD1 C
NeutrinoHD GUI
Fernbedienung
Anschlüsse
Die DBox2 verfügt über diverse Anschlussmöglichkeiten. Hier kann z.B. ein Fernsehgerät, eine Stereoanlage, ein Videorekorder, ein Telefonanschluss oder ein Netzwerk angeschlossen werden.
HD1 S
- Netzkabel (100V-230Volt / 50Hz/60Hz / 30W max.)
- Netzschalter
- SATA (Festplattenanschluss ohne Stromversorgung)
- Ethernet (RJ45 - 100MBit/Full-Duplex)
- HDMI
- S/P-DIF (Optischer Digitalausgang)
- Scart (1x TV)
- RS 232 (Serieller Anschluss)
- Stereo RCA (Cinch) Output
- Video FBAS (Cinch)
- Component (Cinch)
- LNBIN (13/18Volt / 500 mA max.)
- LNBOUT
HD1 C
- Netzkabel (100V-250Volt / 50Hz/60Hz / 45W max.)
- Netzschalter
- E-SATA/USB (Festplattenanschluss mit Stromversorgung)
- Ethernet (RJ45 - 100MBit/Full-Duplex)
- RJ11
- HDMI
- S/P-DIF (Optischer Digitalausgang)
- Scart (1x TV)
- RS 232 (Serieller Anschluss)
- Stereo RCA (Cinch) Output
- Video FBAS (Cinch)
- Component (Cinch)
- RF IN
- RF OUT
Innenleben
Hauptprozessor Chip NXP/Philips CX24500
Video Decoder MPEG-2/H.264/VC-1
- Capable of decoding an HDTV program in the following formats: MPEG-2 MP@HL, MP@ML. MP@LL, SP@ML, AVC HP@L4.1, VC-1 AP@L3 and MP@HL
- Supports decoding for picture sizes up to 1920x1080 @ 30fps; supports all ATSC, DIRECTV, DVB and SCTE formats
- Supports OpenCable HDTV constrained image output on YPrPb
- Supports Advanced DTV closed captions according to EIA-708-B
- Supports Analog closed captions per EIA-608
- Supports MPEG-1 video decoding with up-sampling and filtering of low resolution video modes to full CCIR601 picture size
- Supports 14:9, 16:9 and 20:9 image aspect ratios through pan/scan or letterboxing
- Supports 3:2 pull-down of 24fps video sequence
- Supports video trick modes for PVR applications
- Automatic error concealment
Audio Decoder
- Program decoding of MPEG-1, MPEG-2, Dolby Digital, Dolby Digital Plus, MPEG-2 AAC, MPEG-4 AAC, aacPlus and WMA encoded bit-streams
- Decodes MPEG-1 Layer I and II (MUSICAM) ISO 11172
- Supports MPEG-1 Layer 3 (MP3) decode
- Supports Windows Media Audio v.9 and WMA Pro decoding
- Supports transcoding of Dolby Digital Plus with downmix to 2-channel stereo and Dolby Digital transcode
- Supports transcoding of aacPlus with down-mix to 2-channel stereo and DTS transcode
- Stereo down-mix extraction from multi-channel MPEG-2 source
- Up to 4-bit LPCM 2-channel output in I2S or left justified serial formats
- Supports sample rates of 16, 22.05, 24, 32, 44.1, 48kHz
- Stereo 24-bit audio DAC for analog audio output
- Automatic error concealment
- A/V synchronization using PTS and STC
- 2-channel ProLogic encoded Dolby Digital down-mix output via I2S and integrated stereo audio DAC
- Single program encoded bit-stream output on S/PDIF port
ARM1176EJ-S (Main System CPU)
- 736 Dhrystone 1.24 MIPS at 594MHz
- 32 kB data cache, 32 kB instruction cache
- Linux/WinCE compatible MMU
- Java support through ARMs Jazelle technology
RAM Chips
Flash Chips
Tuner (Frontend)
DVB-S (Satellit)
Der in der SAT-Variante verbaute Tuner ist von Sharp (BS2F7VZ0169)
- Demodulator STV0903BAB
- Tunerchip STV6110A
DVB-C (Cable/Kabel)
DVB-T (Terrestrisch)
CAM-Chip
Frontprozessor
Netzwerk-Schnittstelle
Modem
Netzteil
IR-Sender/Empfänger
Optischer Ausgang (S/P-DIF)
DiSEqC
siehe: DiSEqC.