Hardware:Spark: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Googgi (Diskussion | Beiträge) |
Dbt (Diskussion | Beiträge) (Formatierungen überarbeitet, Umbrüche brauchen nur bedingt ein <br>) |
||
| Zeile 1: | Zeile 1: | ||
[[Category:Hardware]] | [[Category:Hardware]] | ||
[[Category:Register]] | [[Category:Register]] | ||
__TOC__ | |||
== Hersteller: [http://www.fulansoft.com FULAN (China)] == | == Hersteller: [http://www.fulansoft.com FULAN (China)] == | ||
| Zeile 7: | Zeile 7: | ||
[[Datei:Fulan.jpg]] | [[Datei:Fulan.jpg]] | ||
''siehe auch: [[Hardware:Spark7162]]'' | |||
== Technische Spezifikationen dieser Baureihe: == | == Technische Spezifikationen dieser Baureihe: == | ||
Main Processor: STi7111 @ 450MHz | *Main Processor: STi7111 @ 450MHz | ||
Nor flash: 1x 8MB | *Nor flash: 1x 8MB | ||
Nand flash: 1x 512MB | *Nand flash: 1x 512MB | ||
RAM: 2x 128MB DDR | *RAM: 2x 128MB DDR | ||
Bootloader mit Dual-Boot-Option für Spark (Fulan-Firmware) sowie Enigma2; siehe auch [[Spark:U-Boot]] | *Bootloader mit Dual-Boot-Option für Spark (Fulan-Firmware) sowie Enigma2; siehe auch [[Spark:U-Boot]] | ||
Frontdisplay: beim Standardmodell: 4-stellig alphanumerisch, bei Plus-Modellen: VFD hochauflösend | *Frontdisplay: beim Standardmodell: 4-stellig alphanumerisch, bei Plus-Modellen: VFD hochauflösend | ||
Tuner Type: 1x DVB-S2 SHARP BS2S7VZ7306A | *Tuner Type: 1x DVB-S2 SHARP BS2S7VZ7306A | ||
DiSEqC: 1.0, 1.1 1.2, USALS | *DiSEqC: 1.0, 1.1 1.2, USALS | ||
Demodulation: QPSK, 8PSK | *Demodulation: QPSK, 8PSK | ||
Transport Stream: MPEG-2, H.264 | *Transport Stream: MPEG-2, H.264 | ||
Input Rate: Max.120Mbit/s | *Input Rate: Max.120Mbit/s | ||
Aspect Ratio: 4:3, 16:9, Letter Box | *Aspect Ratio: 4:3, 16:9, Letter Box | ||
Video Decoding: MPEG-2, MP@ML, MPEG-4 part 10/H264 | *Video Decoding: MPEG-2, MP@ML, MPEG-4 part 10/H264 | ||
Video Resolution: 720*480P/I, 720*576P/I, 1280*720p,1920*1080i, 1920*1080p | *Video Resolution: 720*480P/I, 720*576P/I, 1280*720p,1920*1080i, 1920*1080p | ||
Audio Decoding: MEPG-1 layer I/II, Mpeg2 layer II, Dolby digital | *Audio Decoding: MEPG-1 layer I/II, Mpeg2 layer II, Dolby digital | ||
HDMI: VER1.2, Type A | *HDMI: VER1.2, Type A | ||
Sampling Rate: 32, 44.1 and 48KHz | *Sampling Rate: 32, 44.1 and 48KHz | ||
TV-SCART: CVBS / RGB output | *TV-SCART: CVBS / RGB output | ||
Audio L/R output: RCA A/V | *Audio L/R output: RCA A/V | ||
Video CVBS output: Audio L/R output | *Video CVBS output: Audio L/R output | ||
Digital Audio Output: Coaxial | *Digital Audio Output: Coaxial | ||
RS232: Transfer rate 115.2Kbps, 9 pinD-sub Type | *RS232: Transfer rate 115.2Kbps, 9 pinD-sub Type | ||
USB: 1x USB 2.0 | *USB: 1x USB 2.0 | ||
Ethernet: 1x 10M/100M | *Ethernet: 1x 10M/100M | ||
Gehäusebreite: 22 cm | *Gehäusebreite: 22 cm | ||
==Aufstellung der Reseller-Boxen zur Baureihe Spark 7111== | ==Aufstellung der Reseller-Boxen zur Baureihe Spark 7111== | ||
Version vom 31. August 2013, 11:41 Uhr
Hersteller: FULAN (China)
siehe auch: Hardware:Spark7162
Technische Spezifikationen dieser Baureihe:
- Main Processor: STi7111 @ 450MHz
- Nor flash: 1x 8MB
- Nand flash: 1x 512MB
- RAM: 2x 128MB DDR
- Bootloader mit Dual-Boot-Option für Spark (Fulan-Firmware) sowie Enigma2; siehe auch Spark:U-Boot
- Frontdisplay: beim Standardmodell: 4-stellig alphanumerisch, bei Plus-Modellen: VFD hochauflösend
- Tuner Type: 1x DVB-S2 SHARP BS2S7VZ7306A
- DiSEqC: 1.0, 1.1 1.2, USALS
- Demodulation: QPSK, 8PSK
- Transport Stream: MPEG-2, H.264
- Input Rate: Max.120Mbit/s
- Aspect Ratio: 4:3, 16:9, Letter Box
- Video Decoding: MPEG-2, MP@ML, MPEG-4 part 10/H264
- Video Resolution: 720*480P/I, 720*576P/I, 1280*720p,1920*1080i, 1920*1080p
- Audio Decoding: MEPG-1 layer I/II, Mpeg2 layer II, Dolby digital
- HDMI: VER1.2, Type A
- Sampling Rate: 32, 44.1 and 48KHz
- TV-SCART: CVBS / RGB output
- Audio L/R output: RCA A/V
- Video CVBS output: Audio L/R output
- Digital Audio Output: Coaxial
- RS232: Transfer rate 115.2Kbps, 9 pinD-sub Type
- USB: 1x USB 2.0
- Ethernet: 1x 10M/100M
- Gehäusebreite: 22 cm
Aufstellung der Reseller-Boxen zur Baureihe Spark 7111
| Receiver | Fernbedienung | Reseller-ID | Reseller | CPU | Tuner | Smartcard |
|---|---|---|---|---|---|---|
Alien SHD 8900 |
09 00 0A 00 | www.amikostb.com | STi7111 | 1x DVB-S2 | 1x Conax | |
990 CR HD PVR Spark LX (wird nicht mehr gebaut) |
09 00 07 00 | www.cynextra.com | STi7111 | 1x DVB-S2 | 1x Conax | |
Spark Reloaded |
09 00 07 00 | www.cynextra.com | STi7111 | 1x DVB-S2 | 1x Conax | |
Argus Pingulux |
09 00 08 00 | www.edision.gr | STi7111 | 1x DVB-S2 | 1x Conax | |
Argus Pingulux Plus |
09 00 08 00 | www.edision.gr | STi7111 | 1x DVB-S2 | 1x Conax | |
GI S8120 |
09 00 0B 00 | galaxy-innovations.ru | STi7111 | 1x DVB-S2 | 1x Conax | |
Unix F+ Solo (S902) |
09 00 0E 00 | www.sabsatellite.nl | STi7111 | 1x DVB-S2 | 1x Conax | |
Spark Datei:Dynavision Spark back.jpg |
09 00 0D 00 | www.e-dynavision.com | STi7111 | 1x DVB-S2 | 1x Conax | |
Spark Plus Datei:Dynavision Spark back.jpg |
09 00 0D 00 | www.e-dynavision.com | STi7111 | 1x DVB-S2 | 1x Conax | |
Spark I+ |
09 00 1D 00 | www.fulan.ru | STi7111 | 1x DVB-S2 | 1x Conax | |
Premier 1+ Datei:Truman 1+ rear.jpg |
09 00 03 00 | www.truman1.com | STi7111 | 1x DVB-S2 | 1x Conax | |
Linux 1 Datei:Samsat Linux 1 rear.jpg |
09 00 20 00 | ? | STi7111 | 1x DVB-S2 | 1x Conax | |
SRT 2020 HD Datei:Startrack SRT 2020 rear.jpg |
09 00 21 00 | ? | STi7111 | 1x DVB-S2 | 1x Conax | |
FH 2020 HD Datei:FullHD FH 2020 rear.jpg |
09 00 ?? 00 | ? | STi7111 | 1x DVB-S2 | 1x Conax | |
Spark Datei:Yumatu Spark rear.jpg |
09 00 ?? 00 | www.yumatu.com.tr | STi7111 | 1x DVB-S2 | 1x Conax | |
Hammer 5400 |
09 00 21 00 | www.telran.co.il | STi7111 | 1x DVB-S2 | 1x Conax | |
Fireball 101 Datei:Visionnet Fireball 101 rear.jpg |
09 00 21 00 | www.telran.co.il | STi7111 | 1x DVB-S2 | 1x Conax | |
S750 Datei:Superbox S750 rear.jpg |
09 00 15 00 | www.super-box.info | STi7111 | 1x DVB-S2 | 1x Conax |