Pzapit: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Sky (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
MTM (Diskussion | Beiträge) K (umsortiert) |
||
| Zeile 9: | Zeile 9: | ||
Hilfe mit pzapit --h | Hilfe mit pzapit --h | ||
bouquet list: pzapit [-ra] | bouquet list: pzapit [-ra] (-ra toggles radio mode) | ||
channel list: pzapit [-ra] <bouquet-number> | channel list: pzapit [-ra] <bouquet-number> | ||
zap by number: pzapit [-ra] <bouquet-number> <channel-number> | zap by number: pzapit [-ra] <bouquet-number> <channel-number> | ||
zap by name: pzapit [-ra] -n <channel-name> | zap by name: pzapit [-ra] -n <channel-name> | ||
start/stop playback: pzapit -p | |||
switch record mode on/off: pzapit -re | switch record mode on/off: pzapit -re | ||
set volume: pzapit -vol <0..64> | |||
mute audio: pzapit -mute | |||
unmute audio: pzapit -unmute | |||
change audio pid: pzapit -a <audio-number> | change audio pid: pzapit -a <audio-number> | ||
reload channels bouquets: pzapit -c | reload channels bouquets: pzapit -c | ||
save bouquets: pzapit -sb | save bouquets: pzapit -sb | ||
set diseqc type: pzapit -dt <type> | |||
set diseqc repeats: pzapit -dr <count> | |||
send diseqc 1.2 motor command: pzapit-m <cmdtype> <addr> <cmd> <number of parameters> <parameter 1> <parameter 2> | |||
show satellites: pzapit -sh | show satellites: pzapit -sh | ||
| Zeile 28: | Zeile 33: | ||
start transponderscan: pzapit -st | start transponderscan: pzapit -st | ||
register neutrino as event client: pzapit -rn | register neutrino as event client: pzapit -rn | ||
enter standby: pzapit -esb | enter standby: pzapit -esb | ||
leave standby: pzapit -lsb | leave standby: pzapit -lsb | ||
shutdown zapit: pzapit -kill | |||
switch to ntsc mode: pzapit --ntsc | switch to ntsc mode: pzapit --ntsc | ||
switch to pal mode: pzapit --pal | switch to pal mode: pzapit --pal | ||
activate Iec (requires aviaEXT driver): pzapit --iecon | activate Iec (requires aviaEXT driver): pzapit --iecon | ||
deactivate Iec (requires aviaEXT driver): pzapit --iecoff | deactivate Iec (requires aviaEXT driver): pzapit --iecoff | ||
get Iec state (0=off, 1=on): pzapit --iecstate | get Iec state (0=off, 1=on): pzapit --iecstate | ||
set decoder to PES mode (requires aviaEXT driver): pzapit --pes | set decoder to PES mode (requires aviaEXT driver): pzapit --pes | ||
set decoder to SPTS mode (requires aviaEXT driver): pzapit --spts | set decoder to SPTS mode (requires aviaEXT driver): pzapit --spts | ||
get decoder mode (0=PES, 1=SPTS): pzapit --decmode | get decoder mode (0=PES, 1=SPTS): pzapit --decmode | ||
Aktuelle Version vom 10. April 2009, 23:45 Uhr
Allgemeines
Mit pzapit kann man auf der (Telnet-)Konsole u.a. zwischen den Programmen (TV- und Radio) umschalten, aber auch verschiedene Optionen setzen.
Hilfe mit pzapit --h
bouquet list: pzapit [-ra] (-ra toggles radio mode) channel list: pzapit [-ra] <bouquet-number> zap by number: pzapit [-ra] <bouquet-number> <channel-number> zap by name: pzapit [-ra] -n <channel-name> start/stop playback: pzapit -p switch record mode on/off: pzapit -re set volume: pzapit -vol <0..64> mute audio: pzapit -mute unmute audio: pzapit -unmute change audio pid: pzapit -a <audio-number> reload channels bouquets: pzapit -c save bouquets: pzapit -sb set diseqc type: pzapit -dt <type> set diseqc repeats: pzapit -dr <count> send diseqc 1.2 motor command: pzapit-m <cmdtype> <addr> <cmd> <number of parameters> <parameter 1> <parameter 2> show satellites: pzapit -sh select satellites: pzapit -se <satmask> <diseqc order> start transponderscan: pzapit -st register neutrino as event client: pzapit -rn enter standby: pzapit -esb leave standby: pzapit -lsb shutdown zapit: pzapit -kill switch to ntsc mode: pzapit --ntsc switch to pal mode: pzapit --pal activate Iec (requires aviaEXT driver): pzapit --iecon deactivate Iec (requires aviaEXT driver): pzapit --iecoff get Iec state (0=off, 1=on): pzapit --iecstate set decoder to PES mode (requires aviaEXT driver): pzapit --pes set decoder to SPTS mode (requires aviaEXT driver): pzapit --spts get decoder mode (0=PES, 1=SPTS): pzapit --decmode
Beispiele
pzapit
der Aufruf pzapit ohne Parameter listet die Bouquets.
pzapit 1 1
schaltet z.B. auf den 1. Sender des 1. Bouquets um.
pzapit -ra 1
listet die Sender des 1. Bouquets des Radio-Modus.
pzapit -ra 1 19
schaltet auf den Radio-Sender 19 des 1. Bouquets um.
pzapit -ra -n "YOU FM"
schaltet auf den Radio-Sender "YOU FM"
Grundlagen - Installation - Debug-Mode - Hardware - CDK/Development
LCars - Neutrino - Enigma - Plugins - Spiele - Software - Tools - Howto - FAQ - Images
Hauptseite - News - Alle Artikel - Bewertungen - Gewünschte Seiten - Index - Neue Artikel - Impressum - Team
Hilfeportal - Seite bearbeiten - Bilder - Links - Tabellen - Textgestaltung