Ein Kumpel hat günstig eine Box bei e-Bay ersteigert.
Die sollte immer bei "Loading Kernel" hängen bleiben.
Neu flashen wirds wohl bringen dachte er und hat zu geschlagen, aber so einfach ist es leider nicht.
Wir haben schon mehrere Images (1.5er und 1.6er und Yadd) ausprobiert aber überall kommt im com-Log die selbe Ausgabe.
Hier mal der Log von der yadd:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-a7.a3.60.07.00.00-73
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.10, My IP 192.168.1.14
debug: Sending TFTP-request for file C/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 200228
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Aug 30 2002 - 00:40:08)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-16-d8-e2
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x87D0F (0x1E00 bytes)
FB logo at: 0x80832 (0x74B5 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.1.10; our IP address is 192.168.1.14
Filename 'C/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
########################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647325 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (Sinnlos98@ATHLON) (gcc version 3.2) #9 Fri Aug 30 00:40:23
2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.1.10:C/yadd/
cdkroot/ ip=192.168.1.14:192.168.1.10:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30788k available (1136k kernel code, 376k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:16:d8:e2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.1.14, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.1.14, domain=, nis-domain=(none),
bootserver=192.168.1.10, rootserver=192.168.1.10, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.1.10
Looking up port of RPC 100005/1 on 192.168.1.10
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.3 (2002.08.29-22:41+0000) multi-callNote: /etc/modu
les.conf is more recent than /lib/modules/2.4.19/modules.dep
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C3881734 XER: 20000000 LR: C3881710 SP: C1DD9E60 REGS: c1dd9db0 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1dd8000[43] 'modprobe' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: FFFFFF80 C1DD9E60 C1DD8000 C3881E18 C0136C38 C3886000 C3882420 C3886000
GPR08: 00000000 00000000 C3880000 C3886000 22224028 1003AD8C 00000000 00000000
GPR16: 7FFFEC3C 00000001 00000003 00000000 00009032 01DD9F40 C1DD9EA8 100451E4
GPR24: C1D12000 C01F0880 00000004 00000060 FFFFFFEA C3880000 C3884FE0 C3881000
Call backtrace:
C3881710 C38817FC C3881D80 C0012680 C000435C 100440B8 10003B50
10004C48 10008E90 1000D274 1000D6F4 1000DA60 1000E1B8 1000906C
0FED9960 00000000
Bus error
[: No such file or directory
[: No such file or directory
.: Can't open /tmp/dbox.sh
Please press Enter to activate this console. [: No such file or directory
.: Can't open /tmp/dbox.sh
Scheint wohl was ernstes zu sein?
Danke für Eure Hilfe.
mfg
MichaZ
